Which ECUs do you support?

Bosch EDC15/17 (incl. EDC17C46/C50/C54/C64/C74), MED17, Siemens SIMOS, Continental SID, Delphi DCM6.2/DCM3.x, Magneti Marelli, Temic for TCU. Database is constantly expanding — if your ECU is missing, the engineer disassembles the original via Ghidra and adds it.

What format do you accept for the original ECU?

We accept .bin, .hex, .ori — standard dump from any programmer: KESS3, Autotuner, MPPS, Trasdata, PCMflash, CMD Flash, KTAG. OBD or Bench read — makes no difference.

Who recalculates the file checksums?

Checksums are recalculated automatically in WinOLS5 — all major algorithms supported (Bosch CRC32, Siemens, Delphi, Magneti Marelli). The output is a flash-ready file, no need to run it through a separate checksum solver.

How long does it take to return the Stage file?

30-60 minutes during business hours. The order is created in the portal, the engineer sees it immediately, status updates in real time. Urgent cases can be flagged — we take them first.

Do you do free revisions if the file did not work?

Yes, we redo it at no extra charge. Send the OBD log after flashing — the engineer checks the actual parameters and corrects the calibration. Communication directly via Telegram, no ticketing systems.

What is the payment model — subscription or credits?

Payment in euros, one-time per order, no subscriptions (1 € = 1 portal credit). No monthly fees like ATF, Magicmotorsport and other services.

John Deere — Stage 1 / Stage 2 parameters database

or choose step by step

Choose a vehicle type

The CHIPOK database holds 95 engines for John Deere with reverse-engineered ECUs and Stage 1 / Stage 2 target parameters. We cover 16 models — from early generations to current platforms. Diesel engines only.

Двигатели и платформы:

Основные двигатели: PowerTech 2.4L (3-cyl), 4.5L 4-cyl, 6.8L 6-cyl (PowerTech Plus, PowerTech E, PSS, PVS), 9.0L (6090H), 13.5L (6135H), JD 4045, JD 6068, JD 6090, JD 6135
Платформы: 5R, 6R/6M/6E (mid-range), 7R, 8R, 8RT, 8RX, 9R/9RT/9RX (high-hp), S680/S690/S700/S780/S790 combines, X9 combines, 4WD scrapers

Поддерживаемые ЭБУ:

Производители: Bosch / Continental / Denso / Siemens
Конкретные блоки John Deere в базе: John Deere proprietary L01, L02, L03, L04, L05, L06, L08, L09, L11 ECMs, Denso ECM (CCU — Coordinator Control Unit), JDCAN, PowerView 1000/1100/1500/1700, GreenStar 3 monitor, Bosch EDC17CV41, EDC17CV44 (on newer Tier 4f), CommandPRO TCU (IVT/AutoPowr), eAutoPowr controller (electric trans), JD-specific Tier 5 PCM
Специфика John Deere: Denso/Bosch ECU — DEF/SCR disable on 6R/7R, work with IVT/AutoPowr transmissions

Available options:

Stage 1
torque increase
EGR / DPF / SCR (AdBlue/DEF) off
DTC delete
CVT/Vario transmission calibration

Условия обслуживания:

Калибровки выполняются вручную в WinOLS5 + Ghidra под конкретный блок управления
Чек-суммы пересчитываются на стороне инженера — файл готов к заливке через актуальный программатор
Возврат файла за 30-60 минут в рабочее время
Бесплатные ревизии по логу OBD