John Deere 9R Series 9560RT 560hp (412kW) 2585Nm — Stage 1 file (+51 hp)
hp
Stage 1 file for John Deere 9R Series 9560RT 560hp (412kW) 2585Nm
Target +0 hp. Custom development for your engine.
Chip tuning for John Deere 9R Series 9560RT 560hp (412kW) 2585Nm ECU
John Deere 9R Series (I) 9560RT 560hp (412kW) 2585Nm — agricultural diesel engine of the agricultural segment of the Deere & Company group (США, 1837). Stage 1 chip tuning raises power from 560 to 611 hp (+51 hp, +9%) and torque from 2585 to 2770 Nm (+185 Nm).
JD Power Systems is the in-house division producing diesel engines. John Deere is the world's largest agricultural machinery manufacturer, founded in 1837. The John Deere logo, a leaping deer, is an iconic symbol of the agricultural segment. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Топ агро-дизели — мощностной потолок сегмента.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Top-tier John Deere machines sit at the power ceiling of the global agricultural segment.
Frequently asked questions
How many horsepower does the John Deere 9R Series 9560RT 560hp (412kW) 2585Nm reach after a remap?
Stage 1 chip tuning on the John Deere 9R Series 9560RT 560hp (412kW) 2585Nm boosts engine output by 51 hp: from 560 to 611 hp. Torque rises from 2585 to 2770 Nm (+185 Nm).
What changes in the John Deere 9R Series ECU after Stage 1?
Stage 1 on the John Deere 9R Series 9560RT 560hp (412kW) 2585Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +51 hp with no hardware changes.
What does Stage 1 give on the top-spec John Deere 9R Series 9560RT 560hp (412kW) 2585Nm?
On the top-spec John Deere 9R Series 9560RT 560hp (412kW) 2585Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the John Deere 9R Series 9560RT 560hp (412kW) 2585Nm?
Stage 2 for the John Deere 9R Series 9560RT 560hp (412kW) 2585Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the John Deere 9R Series?
Stage 1 on the John Deere 9R Series voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the John Deere 9R Series 9560RT 560hp (412kW) 2585Nm done?
The full remap cycle for the John Deere 9R Series — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the John Deere 9R Series?
The original John Deere 9R Series ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the John Deere 9R Series 9560RT 560hp (412kW) 2585Nm?
The cost of Stage 1 for the John Deere 9R Series 9560RT 560hp (412kW) 2585Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.