John Deere 8R Series 8360RT 360hp (265kW) 1686Nm — Stage 1 file (+36 hp)
hp
Stage 1 file for John Deere 8R Series 8360RT 360hp (265kW) 1686Nm
Target +0 hp. Custom development for your engine.
Chip tuning for John Deere 8R Series 8360RT 360hp (265kW) 1686Nm ECU
John Deere 8R Series (I) 8360RT 360hp (265kW) 1686Nm — agricultural diesel engine of the agricultural segment of the Deere & Company group (США, 1837). Stage 1 chip tuning raises power from 360 to 396 hp (+36 hp, +10%) and torque from 1686 to 1850 Nm (+164 Nm).
The John Deere logo, a leaping deer, is an iconic symbol of the agricultural segment. John Deere is the global leader in chip tuning volume in the agricultural segment. John Deere specialises in tractors, combines and specialist agricultural machinery. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Топ агро-дизели — мощностной потолок сегмента. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Сельхозсегмент — расход и тяга важнее л.с. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Top-tier John Deere machines sit at the power ceiling of the global agricultural segment.
Frequently asked questions
How much does the power of the John Deere 8R Series 8360RT 360hp (265kW) 1686Nm increase after Stage 1?
Stage 1 chip tuning on the John Deere 8R Series 8360RT 360hp (265kW) 1686Nm boosts engine output by 36 hp: from 360 to 396 hp. Torque rises from 1686 to 1850 Nm (+164 Nm).
What changes in the John Deere 8R Series ECU after Stage 1?
Stage 1 on the John Deere 8R Series 8360RT 360hp (265kW) 1686Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +36 hp with no hardware changes.
What does Stage 1 give on the top-spec John Deere 8R Series 8360RT 360hp (265kW) 1686Nm?
On the top-spec John Deere 8R Series 8360RT 360hp (265kW) 1686Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the John Deere 8R Series 8360RT 360hp (265kW) 1686Nm?
Stage 2 for the John Deere 8R Series 8360RT 360hp (265kW) 1686Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the John Deere 8R Series?
Stage 1 on the John Deere 8R Series voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the John Deere 8R Series 8360RT 360hp (265kW) 1686Nm done?
The full remap cycle for the John Deere 8R Series — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the John Deere 8R Series?
The original John Deere 8R Series ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the John Deere 8R Series 8360RT 360hp (265kW) 1686Nm?
The cost of Stage 1 for the John Deere 8R Series 8360RT 360hp (265kW) 1686Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.