John Deere 8R Series 8285R 285hp (210kW) 1337Nm — Stage 1 file (+20 hp)
hp
Stage 1 file for John Deere 8R Series 8285R 285hp (210kW) 1337Nm
Target +0 hp. Custom development for your engine.
Chip tuning for John Deere 8R Series 8285R 285hp (210kW) 1337Nm ECU
John Deere 8R Series (I) 8285R 285hp (210kW) 1337Nm — agricultural diesel engine of the agricultural segment of the Deere & Company group (США, 1837). Stage 1 chip tuning raises power from 285 to 305 hp (+20 hp, +7%) and torque from 1334 to 1495 Nm (+161 Nm).
John Deere is the world's largest agricultural machinery manufacturer, founded in 1837. The John Deere logo, a leaping deer, is an iconic symbol of the agricultural segment. John Deere is the global leader in chip tuning volume in the agricultural segment. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. High-output John Deere models are flagship tractors and combines with solid headroom for Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the John Deere 8R Series 8285R 285hp (210kW) 1337Nm?
Stage 1 for the John Deere 8R Series 8285R 285hp (210kW) 1337Nm adds +20 hp — power increases from 285 to 305 hp (+7%). Torque rises from 1334 to 1495 Nm (+161 Nm).
What does a Stage 1 remap of the John Deere 8R Series 8285R 285hp (210kW) 1337Nm include?
Stage 1 on the John Deere 8R Series 8285R 285hp (210kW) 1337Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
What does Stage 1 give on the powerful John Deere 8R Series 8285R 285hp (210kW) 1337Nm?
Stage 1 on the powerful John Deere 8R Series 8285R 285hp (210kW) 1337Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the John Deere 8R Series 8285R 285hp (210kW) 1337Nm?
Stage 2 for the John Deere 8R Series 8285R 285hp (210kW) 1337Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the John Deere 8R Series?
Stage 1 on the John Deere 8R Series voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the John Deere 8R Series 8285R 285hp (210kW) 1337Nm done?
The full remap cycle for the John Deere 8R Series — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the John Deere 8R Series?
The original John Deere 8R Series ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the John Deere 8R Series 8285R 285hp (210kW) 1337Nm?
The cost of Stage 1 for the John Deere 8R Series 8285R 285hp (210kW) 1337Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.