John Deere 6R Series 6210R 210hp (154kW) 890Nm — Stage 1 file (+30 hp)
hp
Stage 1 file for John Deere 6R Series 6210R 210hp (154kW) 890Nm
Target +0 hp. Custom development for your engine.
Chip tuning for John Deere 6R Series 6210R 210hp (154kW) 890Nm ECU
John Deere 6R Series (I) 6210R 210hp (154kW) 890Nm — agricultural diesel engine of the agricultural segment of the Deere & Company group (США, 1837). Stage 1 chip tuning raises power from 210 to 240 hp (+30 hp, +14%) and torque from 983 to 1112 Nm (+129 Nm).
John Deere specialises in tractors, combines and specialist agricultural machinery. JD Power Systems is the in-house division producing diesel engines. John Deere is the world's largest agricultural machinery manufacturer, founded in 1837. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. High-output John Deere models are flagship tractors and combines with solid headroom for Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the John Deere 6R Series 6210R 210hp (154kW) 890Nm?
Stage 1 chip tuning on the John Deere 6R Series 6210R 210hp (154kW) 890Nm boosts engine output by 30 hp: from 210 to 240 hp. Torque rises from 983 to 1112 Nm (+129 Nm).
What changes in the John Deere 6R Series ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the John Deere 6R Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the John Deere 6R Series?
Stage 1 on the powerful John Deere 6R Series 6210R 210hp (154kW) 890Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the John Deere 6R Series 6210R 210hp (154kW) 890Nm?
Stage 2 for the John Deere 6R Series 6210R 210hp (154kW) 890Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the John Deere 6R Series remain valid after Stage 1?
After remapping the John Deere 6R Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the John Deere 6R Series?
Reading and writing via OBD takes 25-30 minutes on the John Deere 6R Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the John Deere 6R Series?
Before Stage 1 the original of the John Deere 6R Series 6210R 210hp (154kW) 890Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the John Deere 6R Series 6210R 210hp (154kW) 890Nm cost?
The remap price for the John Deere 6R Series 6210R 210hp (154kW) 890Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.