John Deere 6MC Series 6100 100hp (74kW) 452Nm — Stage 1 file (+32 hp)
hp
Stage 1 file for John Deere 6MC Series 6100 100hp (74kW) 452Nm
Target +0 hp. Custom development for your engine.
Chip tuning for John Deere 6MC Series 6100 100hp (74kW) 452Nm ECU
John Deere 6MC Series (I) 6100 100hp (74kW) 452Nm — agricultural diesel engine of the agricultural segment of the Deere & Company group (США, 1837). Stage 1 chip tuning raises power from 100 to 132 hp (+32 hp, +32%) and torque from 452 to 596 Nm (+144 Nm).
JD Power Systems is the in-house division producing diesel engines. John Deere is the world's largest agricultural machinery manufacturer, founded in 1837. The John Deere logo, a leaping deer, is an iconic symbol of the agricultural segment. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. John Deere среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How many horsepower does the John Deere 6MC Series 6100 100hp (74kW) 452Nm reach after a remap?
After Stage 1 the power of the John Deere 6MC Series 6100 100hp (74kW) 452Nm rises from 100 to 132 hp, a gain of 32 hp (+32%). Torque rises from 452 to 596 Nm (+144 Nm).
How does Stage 1 differ from stock on the John Deere 6MC Series?
Stage 1 on the John Deere 6MC Series 6100 100hp (74kW) 452Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +32 hp with no hardware changes.
Is a Stage 1 remap safe for the 6100 100hp (74kW) 452Nm?
Stage 1 on the John Deere 6MC Series 6100 100hp (74kW) 452Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the John Deere 6MC Series 6100 100hp (74kW) 452Nm?
Stage 2 on the John Deere 6MC Series 6100 100hp (74kW) 452Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the John Deere 6MC Series?
Stage 1 on the John Deere 6MC Series voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the John Deere 6MC Series 6100 100hp (74kW) 452Nm done?
The full remap cycle for the John Deere 6MC Series — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the John Deere 6MC Series?
The original John Deere 6MC Series ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the John Deere 6MC Series 6100 100hp (74kW) 452Nm?
The cost of Stage 1 for the John Deere 6MC Series 6100 100hp (74kW) 452Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.