John Deere 6M Series 6130M 4.5 130hp (96kW) 587Nm — Stage 1 file (+28 hp)
hp
Stage 1 file for John Deere 6M Series 6130M 4.5 130hp (96kW) 587Nm
Target +0 hp. Custom development for your engine.
Chip tuning for John Deere 6M Series 6130M 4.5 130hp (96kW) 587Nm ECU
John Deere 6M Series (I) 6130M 4.5 130hp (96kW) 587Nm — agricultural diesel engine of the agricultural segment of the Deere & Company group (США, 1837). Stage 1 chip tuning raises power from 130 to 158 hp (+28 hp, +22%) and torque from 587 to 732 Nm (+145 Nm).
John Deere specialises in tractors, combines and specialist agricultural machinery. JD Power Systems is the in-house division producing diesel engines. John Deere is the world's largest agricultural machinery manufacturer, founded in 1837. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. John Deere среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What power gain do you get after chip tuning the John Deere 6M Series 6130M 4.5 130hp (96kW) 587Nm?
Stage 1 for the John Deere 6M Series 6130M 4.5 130hp (96kW) 587Nm adds +28 hp — power increases from 130 to 158 hp (+22%). Torque rises from 587 to 732 Nm (+145 Nm).
What does a Stage 1 remap of the John Deere 6M Series 6130M 4.5 130hp (96kW) 587Nm include?
Stage 1 is a software optimization of the factory ECU firmware of the John Deere 6M Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +28 hp with no hardware changes.
What is the risk of Stage 1 on the John Deere 6M Series 6130M 4.5 130hp (96kW) 587Nm?
A remap of the John Deere 6M Series 6130M 4.5 130hp (96kW) 587Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the John Deere 6M Series 6130M 4.5 130hp (96kW) 587Nm?
Stage 2 for the John Deere 6M Series 6130M 4.5 130hp (96kW) 587Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the John Deere 6M Series remain valid after Stage 1?
After remapping the John Deere 6M Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the John Deere 6M Series?
Reading and writing via OBD takes 25-30 minutes on the John Deere 6M Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the John Deere 6M Series?
Before Stage 1 the original of the John Deere 6M Series 6130M 4.5 130hp (96kW) 587Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the John Deere 6M Series 6130M 4.5 130hp (96kW) 587Nm cost?
The remap price for the John Deere 6M Series 6130M 4.5 130hp (96kW) 587Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.