John Deere 6030 Series 6430 111hp (82kW) 400Nm — Stage 1 file (+17 hp)
hp
Stage 1 file for John Deere 6030 Series 6430 111hp (82kW) 400Nm
Target +0 hp. Custom development for your engine.
Chip tuning for John Deere 6030 Series 6430 111hp (82kW) 400Nm ECU
John Deere 6030 Series (I) 6430 111hp (82kW) 400Nm — agricultural diesel engine of the agricultural segment of the Deere & Company group (США, 1837). Stage 1 chip tuning raises power from 111 to 128 hp (+17 hp, +15%) and torque from 400 to 566 Nm (+166 Nm).
John Deere specialises in tractors, combines and specialist agricultural machinery. JD Power Systems is the in-house division producing diesel engines. John Deere is the world's largest agricultural machinery manufacturer, founded in 1837. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. John Deere среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What power gain do you get after chip tuning the John Deere 6030 Series 6430 111hp (82kW) 400Nm?
The Stage 1 gain for the John Deere 6030 Series 6430 111hp (82kW) 400Nm is 17 hp (+15%) over the stock 111 hp, for a total of 128 hp. Torque rises from 400 to 566 Nm (+166 Nm).
What is Stage 1 chip tuning for the John Deere 6030 Series?
Stage 1 is a software optimization of the factory ECU firmware of the John Deere 6030 Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +17 hp with no hardware changes.
What is the risk of Stage 1 on the John Deere 6030 Series 6430 111hp (82kW) 400Nm?
A remap of the John Deere 6030 Series 6430 111hp (82kW) 400Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the John Deere 6030 Series 6430 111hp (82kW) 400Nm?
Stage 2 on the John Deere 6030 Series 6430 111hp (82kW) 400Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the John Deere 6030 Series remain valid after Stage 1?
After remapping the John Deere 6030 Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the John Deere 6030 Series?
Reading and writing via OBD takes 25-30 minutes on the John Deere 6030 Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the John Deere 6030 Series?
Before Stage 1 the original of the John Deere 6030 Series 6430 111hp (82kW) 400Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the John Deere 6030 Series 6430 111hp (82kW) 400Nm cost?
The remap price for the John Deere 6030 Series 6430 111hp (82kW) 400Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.