John Deere 6030 Series 6130 80hp (59kW) 330Nm — Stage 1 file (+19 hp)
hp
Stage 1 file for John Deere 6030 Series 6130 80hp (59kW) 330Nm
Target +0 hp. Custom development for your engine.
Chip tuning for John Deere 6030 Series 6130 80hp (59kW) 330Nm ECU
John Deere 6030 Series (I) 6130 80hp (59kW) 330Nm — agricultural diesel engine of the agricultural segment of the Deere & Company group (США, 1837). Stage 1 chip tuning raises power from 80 to 99 hp (+19 hp, +24%) and torque from 330 to 376 Nm (+46 Nm).
John Deere specialises in tractors, combines and specialist agricultural machinery. JD Power Systems is the in-house division producing diesel engines. John Deere is the world's largest agricultural machinery manufacturer, founded in 1837. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Маломощные агро-дизели — компактная техника; Stage 1 безопасный.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Low-output John Deere models are compact tractors; Stage 1 is safe.
Frequently asked questions
What power gain do you get after chip tuning the John Deere 6030 Series 6130 80hp (59kW) 330Nm?
Stage 1 for the John Deere 6030 Series 6130 80hp (59kW) 330Nm adds +19 hp — power increases from 80 to 99 hp (+24%). Torque rises from 330 to 376 Nm (+46 Nm).
What does a Stage 1 remap of the John Deere 6030 Series 6130 80hp (59kW) 330Nm include?
Stage 1 is a software optimization of the factory ECU firmware of the John Deere 6030 Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +19 hp with no hardware changes.
Is Stage 1 worth doing on the base John Deere 6030 Series?
Yes, Stage 1 on the low-output John Deere 6030 Series 6130 80hp (59kW) 330Nm delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the John Deere 6030 Series 6130 80hp (59kW) 330Nm?
Stage 2 for the John Deere 6030 Series 6130 80hp (59kW) 330Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the John Deere 6030 Series remain valid after Stage 1?
After remapping the John Deere 6030 Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the John Deere 6030 Series?
Reading and writing via OBD takes 25-30 minutes on the John Deere 6030 Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the John Deere 6030 Series?
Before Stage 1 the original of the John Deere 6030 Series 6130 80hp (59kW) 330Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the John Deere 6030 Series 6130 80hp (59kW) 330Nm cost?
The remap price for the John Deere 6030 Series 6130 80hp (59kW) 330Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.