John Deere 5M Series 5100 100hp (74kW) 418Nm — Stage 1 file (+26 hp)
hp
Stage 1 file for John Deere 5M Series 5100 100hp (74kW) 418Nm
Target +0 hp. Custom development for your engine.
Chip tuning for John Deere 5M Series 5100 100hp (74kW) 418Nm ECU
John Deere 5M Series (I) 5100 100hp (74kW) 418Nm — agricultural diesel engine of the agricultural segment of the Deere & Company group (США, 1837). Stage 1 chip tuning raises power from 100 to 126 hp (+26 hp, +26%) and torque from 418 to 527 Nm (+109 Nm).
John Deere specialises in tractors, combines and specialist agricultural machinery. JD Power Systems is the in-house division producing diesel engines. John Deere is the world's largest agricultural machinery manufacturer, founded in 1837. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. John Deere среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What power gain do you get after chip tuning the John Deere 5M Series 5100 100hp (74kW) 418Nm?
Stage 1 for the John Deere 5M Series 5100 100hp (74kW) 418Nm adds +26 hp — power increases from 100 to 126 hp (+26%). Torque rises from 418 to 527 Nm (+109 Nm).
What does a Stage 1 remap of the John Deere 5M Series 5100 100hp (74kW) 418Nm include?
Stage 1 on the John Deere 5M Series 5100 100hp (74kW) 418Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +26 hp with no hardware changes.
Is a Stage 1 remap safe for the 5100 100hp (74kW) 418Nm?
Stage 1 on the John Deere 5M Series 5100 100hp (74kW) 418Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the John Deere 5M Series 5100 100hp (74kW) 418Nm?
Stage 2 for the John Deere 5M Series 5100 100hp (74kW) 418Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the John Deere 5M Series?
Stage 1 on the John Deere 5M Series voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the John Deere 5M Series 5100 100hp (74kW) 418Nm done?
The full remap cycle for the John Deere 5M Series — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the John Deere 5M Series?
The original John Deere 5M Series ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the John Deere 5M Series 5100 100hp (74kW) 418Nm?
The cost of Stage 1 for the John Deere 5M Series 5100 100hp (74kW) 418Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.