Jeep Wrangler 4xe (2.0T) 375 hp — Stage 1 file (+40 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Jeep Wrangler 4xe (2.0T) 375 hp ECU

Jeep Wrangler (2018 - JL) 4xe (2.0T) 375 hp — mass-market hybrid engine of the passenger segment of the Stellantis group (США, 1941). Stage 1 chip tuning raises power from 375 to 415 hp (+40 hp, +11%) and torque from 637 to 697 Nm (+60 Nm). ECU — Siemens/Continental GPEC4. Flashing method: OBD or Bench depending on the unit's protection. The ZF 8P75PH TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants.

Trail Rated is Jeep's signature certification for off-road capability. The Jeep range comprises the Wrangler, Cherokee, Grand Cherokee, Compass, Renegade, Gladiator and Avenger. Jeep shares platforms and engines with Dodge, Chrysler and Ram. Jeep PHEV variants combine a turbo engine with an electric motor. The Jeep Avenger is a compact electric car on the Stellantis platform. Jeep 4xe is the badge for the brand's PHEV models (Wrangler 4xe, Grand Cherokee 4xe).

Protection on modern Jeep models uses Tricore, so Bench is required for the top models. The Jeep community in the US offers a large pool of ready-made Stage files for off-road use. In Europe the Jeep community is growing thanks to the diesel versions. Top-tier Jeep Trackhawk/SRT engines sit at the power ceiling of American SUVs; the gain is significant.

Aisin transmissions feature on the compact crossovers. Jeep uses the ZF 8HP on premium models. The Trackhawk and SRT come with a reinforced ZF 8HP.

Frequently asked questions

How much horsepower does Stage 1 add for the Jeep Wrangler 4xe (2.0T) 375 hp?

Stage 1 chip tuning on the Jeep Wrangler 4xe (2.0T) 375 hp boosts engine output by 40 hp: from 375 to 415 hp. Torque rises from 637 to 697 Nm (+60 Nm).

What changes in the Jeep Wrangler ECU after Stage 1?

Stage 1 is a software optimization of the factory ECU firmware of the Jeep Wrangler with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +40 hp with no hardware changes.

Does Stage 1 make sense on the Jeep Wrangler 4xe (2.0T) 375 hp with this much power?

On the top-spec Jeep Wrangler 4xe (2.0T) 375 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.

What is Stage 2 for the Jeep Wrangler 4xe (2.0T) 375 hp?

Stage 2 for the Jeep Wrangler 4xe (2.0T) 375 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.

What ECU platform does the Jeep Wrangler 4xe (2.0T) 375 hp use?

The Jeep Wrangler 4xe (2.0T) 375 hp is fitted with the Siemens/Continental GPEC4 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.

What does remapping the ZF 8P75PH gearbox give on the Jeep Wrangler 4xe (2.0T) 375 hp?

The ZF 8P75PH TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.

Does the factory warranty of the Jeep Wrangler remain valid after Stage 1?

After remapping the Jeep Wrangler, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.

How long is the wait for a Stage 1 remap for the Jeep Wrangler?

Reading and writing via OBD takes 25-30 minutes on the Jeep Wrangler. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.

How do you roll back to the factory firmware of the Jeep Wrangler?

Before Stage 1 the original of the Jeep Wrangler 4xe (2.0T) 375 hp is read out and saved — returning to the factory state is possible at any time.

How much does chip tuning the Jeep Wrangler 4xe (2.0T) 375 hp cost?

The remap price for the Jeep Wrangler 4xe (2.0T) 375 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.

Last updated: 30.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno