Jeep Wrangler 3.0 CRD EU6 264 hp — Stage 1 file (+31 hp)
hp
Stage 1 file for Jeep Wrangler 3.0 CRD EU6 264 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Jeep Wrangler 3.0 CRD EU6 264 hp ECU
Jeep Wrangler (2018 - JL) 3.0 CRD EU6 264 hp — mass-market diesel engine of the passenger segment of the Stellantis group (США, 1941). Stage 1 chip tuning raises power from 264 to 295 hp (+31 hp, +12%) and torque from 600 to 650 Nm (+50 Nm). This engine ships with different ECU variants: Bosch EDC17C69, Bosch EDC17C79. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HP75H TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. A 2018 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.
Jeep is part of the Stellantis group (formerly FCA). Jeep specialises in four-wheel-drive off-roaders and crossovers. Trail Rated is Jeep's signature certification for off-road capability. Jeep diesels are popular in Europe for touring and off-road use. Modern Jeep diesels use Tricore and usually require Bench. DPF/SCR with AdBlue is standard on Euro-6 Jeep diesels.
The Jeep community in the US offers a large pool of ready-made Stage files for off-road use. In Europe the Jeep community is growing thanks to the diesel versions. Protection on modern Jeep models uses Tricore, so Bench is required for the top models. High-output Jeep models are the top-spec Grand Cherokee and Wrangler, with solid headroom for Stage 1.
The ZF 8HP TCU rarely needs calibration below Stage 1+. Jeep uses the ZF 8HP on premium models. Aisin transmissions feature on the compact crossovers.
Frequently asked questions
How much does the power of the Jeep Wrangler 3.0 CRD EU6 264 hp increase after Stage 1?
Stage 1 chip tuning on the Jeep Wrangler 3.0 CRD EU6 264 hp boosts engine output by 31 hp: from 264 to 295 hp. Torque rises from 600 to 650 Nm (+50 Nm).
What changes in the Jeep Wrangler ECU after Stage 1?
Stage 1 chip tuning of the Jeep Wrangler is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +31 hp with no hardware changes.
Is Stage 1 safe on the high-output Jeep Wrangler 3.0 CRD EU6 264 hp?
Stage 1 on the powerful Jeep Wrangler 3.0 CRD EU6 264 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How much does Stage 2 add on the Jeep Wrangler?
Stage 2 for the Jeep Wrangler 3.0 CRD EU6 264 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Jeep Wrangler 3.0 CRD EU6 264 hp?
The Jeep Wrangler 3.0 CRD EU6 264 hp was fitted with different ECUs depending on the year and trim: Bosch EDC17C69, Bosch EDC17C79. The write method (OBD, Bench, Boot) is determined when the unit is read.
Is the ZF 8HP75H TCU calibrated together with Stage 1?
Yes, on the Jeep Wrangler 3.0 CRD EU6 264 hp the ZF 8HP75H TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the Jeep Wrangler warranty after chip tuning?
The factory warranty of the Jeep Wrangler does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Jeep Wrangler take?
On the Jeep Wrangler 3.0 CRD EU6 264 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Jeep Wrangler?
Yes, the original ECU firmware of the Jeep Wrangler 3.0 CRD EU6 264 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Jeep Wrangler?
Stage 1 for the Jeep Wrangler 3.0 CRD EU6 264 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.