Jeep Wrangler 3.6 v6 284 hp — Stage 1 file (+16 hp)
hp
Stage 1 file for Jeep Wrangler 3.6 v6 284 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Jeep Wrangler 3.6 v6 284 hp ECU
Jeep Wrangler (2010 - JK-FL) 3.6 v6 284 hp — mass-market petrol engine of the passenger segment of the Stellantis group (США, 1941). Stage 1 chip tuning raises power from 284 to 300 hp (+16 hp, +6%) and torque from 347 to 360 Nm (+13 Nm). This engine ships with different ECU variants: Siemens/Continental GPEC2, Siemens/Continental GPEC2A. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HP45-845RE TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. A petrol engine built in 2010 — a Tricore platform without strong protection; OBD access works.
Jeep is part of the Stellantis group (formerly FCA). Jeep specialises in four-wheel-drive off-roaders and crossovers. Trail Rated is Jeep's signature certification for off-road capability. On Hemi V8-powered Jeep models, Stage 1 delivers a confident gain. Jeep shares engines with Dodge and Chrysler. The Jeep Trackhawk is the flagship, powered by the Hellcat-family supercharged Hemi V8.
In Europe the Jeep community is growing thanks to the diesel versions. The Jeep community in the US offers a large pool of ready-made Stage files for off-road use. High-output Jeep models are the top-spec Grand Cherokee and Wrangler, with solid headroom for Stage 1.
The ZF 8HP TCU rarely needs calibration below Stage 1+. Jeep uses the ZF 8HP on premium models. Aisin transmissions feature on the compact crossovers.
Frequently asked questions
How much does the power of the Jeep Wrangler 3.6 v6 284 hp increase after Stage 1?
Stage 1 for the Jeep Wrangler 3.6 v6 284 hp adds +16 hp — power increases from 284 to 300 hp (+6%). Torque rises from 347 to 360 Nm (+13 Nm).
What does a Stage 1 remap of the Jeep Wrangler 3.6 v6 284 hp include?
Stage 1 chip tuning of the Jeep Wrangler is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +16 hp with no hardware changes.
Is Stage 1 safe on the high-output Jeep Wrangler 3.6 v6 284 hp?
Stage 1 on the powerful Jeep Wrangler 3.6 v6 284 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How much does Stage 2 add on the Jeep Wrangler?
Stage 2 for the Jeep Wrangler 3.6 v6 284 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Jeep Wrangler 3.6 v6 284 hp?
The Jeep Wrangler 3.6 v6 284 hp was fitted with different ECUs depending on the year and trim: Siemens/Continental GPEC2, Siemens/Continental GPEC2A. The write method (OBD, Bench, Boot) is determined when the unit is read.
Is the ZF 8HP45-845RE TCU calibrated together with Stage 1?
Yes, on the Jeep Wrangler 3.6 v6 284 hp the ZF 8HP45-845RE TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the Jeep Wrangler warranty after chip tuning?
The factory warranty of the Jeep Wrangler does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Jeep Wrangler take?
On the Jeep Wrangler 3.6 v6 284 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Jeep Wrangler?
Yes, the original ECU firmware of the Jeep Wrangler 3.6 v6 284 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Jeep Wrangler?
Stage 1 for the Jeep Wrangler 3.6 v6 284 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.