Jeep Wrangler 2.8 CRD 200 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Jeep Wrangler 2.8 CRD 200 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Jeep Wrangler 2.8 CRD 200 hp ECU
Jeep Wrangler (2010 - JK-FL) 2.8 CRD 200 hp — mass-market diesel engine of the passenger segment of the Stellantis group (США, 1941). Stage 1 chip tuning raises power from 200 to 235 hp (+35 hp, +18%) and torque from 410 to 530 Nm (+120 Nm). ECU — Bosch EDC17CP27. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. The 2010 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Jeep is an American off-road brand, founded in 1941 for military use (Willys MB). Jeep is part of the Stellantis group (formerly FCA). Jeep specialises in four-wheel-drive off-roaders and crossovers. Jeep diesels are popular in Europe for touring and off-road use. DPF/SCR with AdBlue is standard on Euro-6 Jeep diesels. Jeep uses Stellantis MultiJet diesels and Cummins units on the Wrangler/Gladiator.
The Jeep community in the US offers a large pool of ready-made Stage files for off-road use. In Europe the Jeep community is growing thanks to the diesel versions. High-output Jeep models are the top-spec Grand Cherokee and Wrangler, with solid headroom for Stage 1.
Frequently asked questions
How many horsepower does the Jeep Wrangler 2.8 CRD 200 hp reach after a remap?
The Stage 1 gain for the Jeep Wrangler 2.8 CRD 200 hp is 35 hp (+18%) over the stock 200 hp, for a total of 235 hp. Torque rises from 410 to 530 Nm (+120 Nm).
What is Stage 1 chip tuning for the Jeep Wrangler?
Stage 1 is a software optimization of the factory ECU firmware of the Jeep Wrangler with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Jeep Wrangler?
The high-output Jeep Wrangler 2.8 CRD 200 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Jeep Wrangler 2.8 CRD 200 hp?
Stage 2 on the Jeep Wrangler 2.8 CRD 200 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Jeep Wrangler 2.8 CRD 200 hp use?
The Jeep Wrangler 2.8 CRD 200 hp is fitted with the Bosch EDC17CP27 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Jeep Wrangler remain valid after Stage 1?
After remapping the Jeep Wrangler, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Jeep Wrangler?
Reading and writing via OBD takes 25-30 minutes on the Jeep Wrangler. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Jeep Wrangler?
Before Stage 1 the original of the Jeep Wrangler 2.8 CRD 200 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Jeep Wrangler 2.8 CRD 200 hp cost?
The remap price for the Jeep Wrangler 2.8 CRD 200 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.