Jeep Renegade 2.0 JTDm 140 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Jeep Renegade 2.0 JTDm 140 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Jeep Renegade 2.0 JTDm 140 hp ECU
Jeep Renegade (2014) 2.0 JTDm 140 hp — mass-market diesel engine of the passenger segment of the Stellantis group (США, 1941). Stage 1 chip tuning raises power from 140 to 170 hp (+30 hp, +21%) and torque from 350 to 420 Nm (+70 Nm). This engine ships with different ECU variants: Bosch EDC17C49, Bosch EDC17C79. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A diesel built in 2014 — the Tricore ECU era; OBD flash works on most production revisions.
Trail Rated is Jeep's signature certification for off-road capability. The Jeep range comprises the Wrangler, Cherokee, Grand Cherokee, Compass, Renegade, Gladiator and Avenger. Jeep shares platforms and engines with Dodge, Chrysler and Ram. On mid-range Jeep diesels, Stage 1 is noticeable in Nm. Jeep diesels are popular in Europe for touring and off-road use. DPF/SCR with AdBlue is standard on Euro-6 Jeep diesels.
On Jeep diesels, Stage 1 delivers a noticeable torque gain for off-road use. The Jeep community in the US offers a large pool of ready-made Stage files for off-road use. In Europe the Jeep community is growing thanks to the diesel versions. Jeep diesels are popular in Europe for touring and off-road use. Mid-range Jeep — crossovers and compact off-roaders; Stage 1 while preserving engine life.
Frequently asked questions
How much horsepower does Stage 1 add for the Jeep Renegade 2.0 JTDm 140 hp?
Stage 1 for the Jeep Renegade 2.0 JTDm 140 hp adds +30 hp — power increases from 140 to 170 hp (+21%). Torque rises from 350 to 420 Nm (+70 Nm).
What does a Stage 1 remap of the Jeep Renegade 2.0 JTDm 140 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Jeep Renegade with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Jeep Renegade 2.0 JTDm 140 hp?
A remap of the Jeep Renegade 2.0 JTDm 140 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Jeep Renegade 2.0 JTDm 140 hp?
Stage 2 for the Jeep Renegade 2.0 JTDm 140 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Jeep Renegade 2.0 JTDm 140 hp built with?
The Jeep Renegade 2.0 JTDm 140 hp comes with 2 ECU variants: Bosch EDC17C49, Bosch EDC17C79. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Jeep Renegade remain valid after Stage 1?
After remapping the Jeep Renegade, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Jeep Renegade?
Reading and writing via OBD takes 25-30 minutes on the Jeep Renegade. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Jeep Renegade?
Before Stage 1 the original of the Jeep Renegade 2.0 JTDm 140 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Jeep Renegade 2.0 JTDm 140 hp cost?
The remap price for the Jeep Renegade 2.0 JTDm 140 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.