Jeep Cherokee 2.2 Multijet EU6d 200 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Jeep Cherokee 2.2 Multijet EU6d 200 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Jeep Cherokee 2.2 Multijet EU6d 200 hp ECU
Jeep Cherokee (2019) 2.2 Multijet EU6d 200 hp — mass-market diesel engine of the passenger segment of the Stellantis group (США, 1941). Stage 1 chip tuning raises power from 200 to 225 hp (+25 hp, +12%) and torque from 450 to 500 Nm (+50 Nm). ECU — Bosch EDC17C69. Flashing method: OBD or Bench depending on the unit's protection. A modern diesel built in 2019 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
Jeep specialises in four-wheel-drive off-roaders and crossovers. Trail Rated is Jeep's signature certification for off-road capability. The Jeep range comprises the Wrangler, Cherokee, Grand Cherokee, Compass, Renegade, Gladiator and Avenger. High-output Jeep diesels sit in the premium crossover segment. Jeep uses Stellantis MultiJet diesels and Cummins units on the Wrangler/Gladiator. Jeep diesels are popular in Europe for touring and off-road use.
In Europe the Jeep community is growing thanks to the diesel versions. Protection on modern Jeep models uses Tricore, so Bench is required for the top models. The Jeep community in the US offers a large pool of ready-made Stage files for off-road use. High-output Jeep models are the top-spec Grand Cherokee and Wrangler, with solid headroom for Stage 1.
Frequently asked questions
How many horsepower does the Jeep Cherokee 2.2 Multijet EU6d 200 hp reach after a remap?
The Stage 1 gain for the Jeep Cherokee 2.2 Multijet EU6d 200 hp is 25 hp (+12%) over the stock 200 hp, for a total of 225 hp. Torque rises from 450 to 500 Nm (+50 Nm).
What is Stage 1 chip tuning for the Jeep Cherokee?
Stage 1 on the Jeep Cherokee 2.2 Multijet EU6d 200 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
What does Stage 1 give on the powerful Jeep Cherokee 2.2 Multijet EU6d 200 hp?
The high-output Jeep Cherokee 2.2 Multijet EU6d 200 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Jeep Cherokee 2.2 Multijet EU6d 200 hp?
Stage 2 on the Jeep Cherokee 2.2 Multijet EU6d 200 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Jeep Cherokee 2.2 Multijet EU6d 200 hp run?
The control unit of the Jeep Cherokee 2.2 Multijet EU6d 200 hp is the Bosch EDC17C69. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Jeep Cherokee?
Stage 1 on the Jeep Cherokee voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Jeep Cherokee 2.2 Multijet EU6d 200 hp done?
The full remap cycle for the Jeep Cherokee — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Jeep Cherokee?
The original Jeep Cherokee ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Jeep Cherokee 2.2 Multijet EU6d 200 hp?
The cost of Stage 1 for the Jeep Cherokee 2.2 Multijet EU6d 200 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.