Jeep Cherokee 2.8 CRD 150 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Jeep Cherokee 2.8 CRD 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Jeep Cherokee 2.8 CRD 150 hp ECU
Jeep Cherokee (2001) 2.8 CRD 150 hp — mass-market diesel engine of the passenger segment of the Stellantis group (США, 1941). Stage 1 chip tuning raises power from 150 to 200 hp (+50 hp, +33%) and torque from 360 to 420 Nm (+60 Nm). ECU — Bosch EDC15C5. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. The 2001 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Jeep is an American off-road brand, founded in 1941 for military use (Willys MB). Jeep is part of the Stellantis group (formerly FCA). Jeep specialises in four-wheel-drive off-roaders and crossovers. Jeep uses Stellantis MultiJet diesels and Cummins units on the Wrangler/Gladiator. On mid-range Jeep diesels, Stage 1 is noticeable in Nm. Jeep diesels are popular in Europe for touring and off-road use.
On Jeep diesels, Stage 1 delivers a noticeable torque gain for off-road use. The Jeep community in the US offers a large pool of ready-made Stage files for off-road use. In Europe the Jeep community is growing thanks to the diesel versions. Mid-range Jeep — crossovers and compact off-roaders; Stage 1 while preserving engine life. Jeep diesels are popular in Europe for touring and off-road use.
Frequently asked questions
How much does the power of the Jeep Cherokee 2.8 CRD 150 hp increase after Stage 1?
After Stage 1 the power of the Jeep Cherokee 2.8 CRD 150 hp rises from 150 to 200 hp, a gain of 50 hp (+33%). Torque rises from 360 to 420 Nm (+60 Nm).
How does Stage 1 differ from stock on the Jeep Cherokee?
Stage 1 is a software optimization of the factory ECU firmware of the Jeep Cherokee with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +50 hp with no hardware changes.
What is the risk of Stage 1 on the Jeep Cherokee 2.8 CRD 150 hp?
A remap of the Jeep Cherokee 2.8 CRD 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Jeep Cherokee 2.8 CRD 150 hp?
Stage 2 on the Jeep Cherokee 2.8 CRD 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Jeep Cherokee 2.8 CRD 150 hp use?
The Jeep Cherokee 2.8 CRD 150 hp is fitted with the Bosch EDC15C5 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Jeep Cherokee remain valid after Stage 1?
After remapping the Jeep Cherokee, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Jeep Cherokee?
Reading and writing via OBD takes 25-30 minutes on the Jeep Cherokee. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Jeep Cherokee?
Before Stage 1 the original of the Jeep Cherokee 2.8 CRD 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Jeep Cherokee 2.8 CRD 150 hp cost?
The remap price for the Jeep Cherokee 2.8 CRD 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.