JCB Fastrac 8310 309hp (227kW) 1310Nm — Stage 1 file (+55 hp)
hp
Stage 1 file for JCB Fastrac 8310 309hp (227kW) 1310Nm
Target +0 hp. Custom development for your engine.
Chip tuning for JCB Fastrac 8310 309hp (227kW) 1310Nm ECU
JCB Fastrac (I) 8310 309hp (227kW) 1310Nm — agricultural diesel engine of the agricultural segment of the JCB Group group (Великобритания, 1945). Stage 1 chip tuning raises power from 309 to 364 hp (+55 hp, +18%) and torque from 1310 to 1588 Nm (+278 Nm).
JCB develops its own DieselMax diesel engines. JCB is a British manufacturer of specialist machinery, founded in 1945. JCB is the world's largest manufacturer of backhoe loaders. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Высокомощные JCB — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the JCB Fastrac 8310 309hp (227kW) 1310Nm?
The Stage 1 gain for the JCB Fastrac 8310 309hp (227kW) 1310Nm is 55 hp (+18%) over the stock 309 hp, for a total of 364 hp. Torque rises from 1310 to 1588 Nm (+278 Nm).
What is Stage 1 chip tuning for the JCB Fastrac?
Stage 1 on the JCB Fastrac 8310 309hp (227kW) 1310Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +55 hp with no hardware changes.
What does Stage 1 give on the powerful JCB Fastrac 8310 309hp (227kW) 1310Nm?
The high-output JCB Fastrac 8310 309hp (227kW) 1310Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the JCB Fastrac 8310 309hp (227kW) 1310Nm?
Stage 2 on the JCB Fastrac 8310 309hp (227kW) 1310Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the JCB Fastrac?
Stage 1 on the JCB Fastrac voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the JCB Fastrac 8310 309hp (227kW) 1310Nm done?
The full remap cycle for the JCB Fastrac — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the JCB Fastrac?
The original JCB Fastrac ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the JCB Fastrac 8310 309hp (227kW) 1310Nm?
The cost of Stage 1 for the JCB Fastrac 8310 309hp (227kW) 1310Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.