JCB Fastrac 8250 264hp (194kW) 1180Nm — Stage 1 file (+62 hp)
hp
Stage 1 file for JCB Fastrac 8250 264hp (194kW) 1180Nm
Target +0 hp. Custom development for your engine.
Chip tuning for JCB Fastrac 8250 264hp (194kW) 1180Nm ECU
JCB Fastrac (I) 8250 264hp (194kW) 1180Nm — agricultural diesel engine of the agricultural segment of the JCB Group group (Великобритания, 1945). Stage 1 chip tuning raises power from 264 to 326 hp (+62 hp, +23%) and torque from 1180 to 1392 Nm (+212 Nm).
JCB is a British manufacturer of specialist machinery, founded in 1945. JCB is the world's largest manufacturer of backhoe loaders. JCB develops its own DieselMax diesel engines. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные JCB — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How many horsepower does the JCB Fastrac 8250 264hp (194kW) 1180Nm reach after a remap?
The Stage 1 gain for the JCB Fastrac 8250 264hp (194kW) 1180Nm is 62 hp (+23%) over the stock 264 hp, for a total of 326 hp. Torque rises from 1180 to 1392 Nm (+212 Nm).
What is Stage 1 chip tuning for the JCB Fastrac?
Stage 1 is a software optimization of the factory ECU firmware of the JCB Fastrac with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +62 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the JCB Fastrac?
The high-output JCB Fastrac 8250 264hp (194kW) 1180Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the JCB Fastrac 8250 264hp (194kW) 1180Nm?
Stage 2 on the JCB Fastrac 8250 264hp (194kW) 1180Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the JCB Fastrac remain valid after Stage 1?
After remapping the JCB Fastrac, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the JCB Fastrac?
Reading and writing via OBD takes 25-30 minutes on the JCB Fastrac. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the JCB Fastrac?
Before Stage 1 the original of the JCB Fastrac 8250 264hp (194kW) 1180Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the JCB Fastrac 8250 264hp (194kW) 1180Nm cost?
The remap price for the JCB Fastrac 8250 264hp (194kW) 1180Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.