JCB Fastrac 7270 264hp (194kW) 990Nm — Stage 1 file (+80 hp)
hp
Stage 1 file for JCB Fastrac 7270 264hp (194kW) 990Nm
Target +0 hp. Custom development for your engine.
Chip tuning for JCB Fastrac 7270 264hp (194kW) 990Nm ECU
JCB Fastrac (I) 7270 264hp (194kW) 990Nm — agricultural diesel engine of the agricultural segment of the JCB Group group (Великобритания, 1945). Stage 1 chip tuning raises power from 264 to 344 hp (+80 hp, +30%) and torque from 990 to 1193 Nm (+203 Nm).
JCB is a British manufacturer of specialist machinery, founded in 1945. JCB is the world's largest manufacturer of backhoe loaders. JCB develops its own DieselMax diesel engines. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные JCB — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How many horsepower does the JCB Fastrac 7270 264hp (194kW) 990Nm reach after a remap?
Stage 1 for the JCB Fastrac 7270 264hp (194kW) 990Nm adds +80 hp — power increases from 264 to 344 hp (+30%). Torque rises from 990 to 1193 Nm (+203 Nm).
What does a Stage 1 remap of the JCB Fastrac 7270 264hp (194kW) 990Nm include?
Stage 1 is a software optimization of the factory ECU firmware of the JCB Fastrac with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +80 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the JCB Fastrac?
Stage 1 on the powerful JCB Fastrac 7270 264hp (194kW) 990Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the JCB Fastrac 7270 264hp (194kW) 990Nm?
Stage 2 for the JCB Fastrac 7270 264hp (194kW) 990Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the JCB Fastrac remain valid after Stage 1?
After remapping the JCB Fastrac, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the JCB Fastrac?
Reading and writing via OBD takes 25-30 minutes on the JCB Fastrac. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the JCB Fastrac?
Before Stage 1 the original of the JCB Fastrac 7270 264hp (194kW) 990Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the JCB Fastrac 7270 264hp (194kW) 990Nm cost?
The remap price for the JCB Fastrac 7270 264hp (194kW) 990Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.