JCB Fastrac 7230 223hp (164kW) 950Nm — Stage 1 file (+52 hp)
hp
Stage 1 file for JCB Fastrac 7230 223hp (164kW) 950Nm
Target +0 hp. Custom development for your engine.
Chip tuning for JCB Fastrac 7230 223hp (164kW) 950Nm ECU
JCB Fastrac (I) 7230 223hp (164kW) 950Nm — agricultural diesel engine of the agricultural segment of the JCB Group group (Великобритания, 1945). Stage 1 chip tuning raises power from 223 to 275 hp (+52 hp, +23%) and torque from 950 to 1193 Nm (+243 Nm).
JCB is a British manufacturer of specialist machinery, founded in 1945. JCB is the world's largest manufacturer of backhoe loaders. JCB develops its own DieselMax diesel engines. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные JCB — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the JCB Fastrac 7230 223hp (164kW) 950Nm?
After Stage 1 the power of the JCB Fastrac 7230 223hp (164kW) 950Nm rises from 223 to 275 hp, a gain of 52 hp (+23%). Torque rises from 950 to 1193 Nm (+243 Nm).
How does Stage 1 differ from stock on the JCB Fastrac?
Stage 1 is a software optimization of the factory ECU firmware of the JCB Fastrac with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +52 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the JCB Fastrac?
The high-output JCB Fastrac 7230 223hp (164kW) 950Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the JCB Fastrac 7230 223hp (164kW) 950Nm?
Stage 2 on the JCB Fastrac 7230 223hp (164kW) 950Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the JCB Fastrac remain valid after Stage 1?
After remapping the JCB Fastrac, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the JCB Fastrac?
Reading and writing via OBD takes 25-30 minutes on the JCB Fastrac. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the JCB Fastrac?
Before Stage 1 the original of the JCB Fastrac 7230 223hp (164kW) 950Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the JCB Fastrac 7230 223hp (164kW) 950Nm cost?
The remap price for the JCB Fastrac 7230 223hp (164kW) 950Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.