JCB Fastrac 7170 175hp (129kW) 800Nm — Stage 1 file (+40 hp)
hp
Stage 1 file for JCB Fastrac 7170 175hp (129kW) 800Nm
Target +0 hp. Custom development for your engine.
Chip tuning for JCB Fastrac 7170 175hp (129kW) 800Nm ECU
JCB Fastrac (I) 7170 175hp (129kW) 800Nm — agricultural diesel engine of the agricultural segment of the JCB Group group (Великобритания, 1945). Stage 1 chip tuning raises power from 175 to 215 hp (+40 hp, +23%) and torque from 800 to 982 Nm (+182 Nm).
JCB develops its own DieselMax diesel engines. JCB is a British manufacturer of specialist machinery, founded in 1945. JCB is the world's largest manufacturer of backhoe loaders. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Stage 1 на агро-дизелях — заметный прирост момента для тяги. JCB среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much does the power of the JCB Fastrac 7170 175hp (129kW) 800Nm increase after Stage 1?
Stage 1 chip tuning on the JCB Fastrac 7170 175hp (129kW) 800Nm boosts engine output by 40 hp: from 175 to 215 hp. Torque rises from 800 to 982 Nm (+182 Nm).
What changes in the JCB Fastrac ECU after Stage 1?
Stage 1 on the JCB Fastrac 7170 175hp (129kW) 800Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +40 hp with no hardware changes.
Is a Stage 1 remap safe for the 7170 175hp (129kW) 800Nm?
Stage 1 on the JCB Fastrac 7170 175hp (129kW) 800Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the JCB Fastrac 7170 175hp (129kW) 800Nm?
Stage 2 for the JCB Fastrac 7170 175hp (129kW) 800Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the JCB Fastrac?
Stage 1 on the JCB Fastrac voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the JCB Fastrac 7170 175hp (129kW) 800Nm done?
The full remap cycle for the JCB Fastrac — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the JCB Fastrac?
The original JCB Fastrac ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the JCB Fastrac 7170 175hp (129kW) 800Nm?
The cost of Stage 1 for the JCB Fastrac 7170 175hp (129kW) 800Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.