JCB Fastrac 3200 194hp (143kW) 760Nm — Stage 1 file (+44 hp)
hp
Stage 1 file for JCB Fastrac 3200 194hp (143kW) 760Nm
Target +0 hp. Custom development for your engine.
Chip tuning for JCB Fastrac 3200 194hp (143kW) 760Nm ECU
JCB Fastrac (I) 3200 194hp (143kW) 760Nm — agricultural diesel engine of the agricultural segment of the JCB Group group (Великобритания, 1945). Stage 1 chip tuning raises power from 194 to 238 hp (+44 hp, +23%) and torque from 760 to 935 Nm (+175 Nm).
JCB is a British manufacturer of specialist machinery, founded in 1945. JCB is the world's largest manufacturer of backhoe loaders. JCB develops its own DieselMax diesel engines. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Сельхозсегмент — расход и тяга важнее л.с. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. JCB среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much does the power of the JCB Fastrac 3200 194hp (143kW) 760Nm increase after Stage 1?
The Stage 1 gain for the JCB Fastrac 3200 194hp (143kW) 760Nm is 44 hp (+23%) over the stock 194 hp, for a total of 238 hp. Torque rises from 760 to 935 Nm (+175 Nm).
What is Stage 1 chip tuning for the JCB Fastrac?
Stage 1 is a software optimization of the factory ECU firmware of the JCB Fastrac with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +44 hp with no hardware changes.
What is the risk of Stage 1 on the JCB Fastrac 3200 194hp (143kW) 760Nm?
A remap of the JCB Fastrac 3200 194hp (143kW) 760Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the JCB Fastrac 3200 194hp (143kW) 760Nm?
Stage 2 on the JCB Fastrac 3200 194hp (143kW) 760Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the JCB Fastrac remain valid after Stage 1?
After remapping the JCB Fastrac, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the JCB Fastrac?
Reading and writing via OBD takes 25-30 minutes on the JCB Fastrac. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the JCB Fastrac?
Before Stage 1 the original of the JCB Fastrac 3200 194hp (143kW) 760Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the JCB Fastrac 3200 194hp (143kW) 760Nm cost?
The remap price for the JCB Fastrac 3200 194hp (143kW) 760Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.