JCB Fastrac 3190 193hp (142kW) 750Nm — Stage 1 file (+28 hp)
hp
Stage 1 file for JCB Fastrac 3190 193hp (142kW) 750Nm
Target +0 hp. Custom development for your engine.
Chip tuning for JCB Fastrac 3190 193hp (142kW) 750Nm ECU
JCB Fastrac (I) 3190 193hp (142kW) 750Nm — agricultural diesel engine of the agricultural segment of the JCB Group group (Великобритания, 1945). Stage 1 chip tuning raises power from 193 to 221 hp (+28 hp, +15%) and torque from 750 to 826 Nm (+76 Nm).
JCB is a British manufacturer of specialist machinery, founded in 1945. JCB is the world's largest manufacturer of backhoe loaders. JCB develops its own DieselMax diesel engines. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 на агро-дизелях — заметный прирост момента для тяги. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. JCB среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How many horsepower does the JCB Fastrac 3190 193hp (142kW) 750Nm reach after a remap?
The Stage 1 gain for the JCB Fastrac 3190 193hp (142kW) 750Nm is 28 hp (+15%) over the stock 193 hp, for a total of 221 hp. Torque rises from 750 to 826 Nm (+76 Nm).
What is Stage 1 chip tuning for the JCB Fastrac?
Stage 1 is a software optimization of the factory ECU firmware of the JCB Fastrac with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +28 hp with no hardware changes.
What is the risk of Stage 1 on the JCB Fastrac 3190 193hp (142kW) 750Nm?
A remap of the JCB Fastrac 3190 193hp (142kW) 750Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the JCB Fastrac 3190 193hp (142kW) 750Nm?
Stage 2 on the JCB Fastrac 3190 193hp (142kW) 750Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the JCB Fastrac remain valid after Stage 1?
After remapping the JCB Fastrac, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the JCB Fastrac?
Reading and writing via OBD takes 25-30 minutes on the JCB Fastrac. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the JCB Fastrac?
Before Stage 1 the original of the JCB Fastrac 3190 193hp (142kW) 750Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the JCB Fastrac 3190 193hp (142kW) 750Nm cost?
The remap price for the JCB Fastrac 3190 193hp (142kW) 750Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.