Jaguar XJ 2.0 TI 240 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Jaguar XJ 2.0 TI 240 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Jaguar XJ 2.0 TI 240 hp ECU
Jaguar XJ (2009 - X351) 2.0 TI 240 hp — premium petrol engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 240 to 265 hp (+25 hp, +10%) and torque from 340 to 380 Nm (+40 Nm). This engine ships with different ECU variants: Bosch MED17.0, Bosch MED17.9.7. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A petrol engine built in 2009 — the era before widespread firmware encryption, OBD flash without complications.
SVR (Special Vehicle Operations) is JLR's performance division. Jaguar shares platforms and engines with Land Rover within JLR. Jaguar Ingenium is JLR's modern modular engine family. The Jaguar V8 Supercharged is an iconic premium-segment engine. Jaguar's petrol range spans turbocharged Ingenium units and supercharged V6/V8 engines. High-output Jaguar turbo-petrol engines deliver a solid Stage 1 gain.
The Jaguar community is a premium chip tuning niche in the UK and Europe. High-output Jaguars — the F-Type and F-Pace SVR — offer solid headroom for Stage 1.
Frequently asked questions
How much does the power of the Jaguar XJ 2.0 TI 240 hp increase after Stage 1?
Stage 1 chip tuning on the Jaguar XJ 2.0 TI 240 hp boosts engine output by 25 hp: from 240 to 265 hp. Torque rises from 340 to 380 Nm (+40 Nm).
What changes in the Jaguar XJ ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Jaguar XJ with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Jaguar XJ?
Stage 1 on the powerful Jaguar XJ 2.0 TI 240 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Jaguar XJ 2.0 TI 240 hp?
Stage 2 for the Jaguar XJ 2.0 TI 240 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Jaguar XJ 2.0 TI 240 hp built with?
The Jaguar XJ 2.0 TI 240 hp comes with 2 ECU variants: Bosch MED17.0, Bosch MED17.9.7. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Jaguar XJ remain valid after Stage 1?
After remapping the Jaguar XJ, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Jaguar XJ?
Reading and writing via OBD takes 25-30 minutes on the Jaguar XJ. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Jaguar XJ?
Before Stage 1 the original of the Jaguar XJ 2.0 TI 240 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Jaguar XJ 2.0 TI 240 hp cost?
The remap price for the Jaguar XJ 2.0 TI 240 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.