Jaguar XE 2.0T 300 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Jaguar XE 2.0T 300 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Jaguar XE 2.0T 300 hp ECU
Jaguar XE (2015) 2.0T 300 hp — premium petrol engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 300 to 325 hp (+25 hp, +8%) and torque from 400 to 480 Nm (+80 Nm). ECU — Bosch MED17.9.9. Flashing method: OBD or Bench depending on the unit's protection. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A petrol engine built in 2015 — a Tricore platform without strong protection; OBD access works.
SVR (Special Vehicle Operations) is JLR's performance division. Jaguar shares platforms and engines with Land Rover within JLR. Jaguar Ingenium is JLR's modern modular engine family. The Jaguar V8 Supercharged is an iconic premium-segment engine. Jaguar's petrol range spans turbocharged Ingenium units and supercharged V6/V8 engines. High-output Jaguar turbo-petrol engines deliver a solid Stage 1 gain.
The Jaguar community is a premium chip tuning niche in the UK and Europe. High-output Jaguars — the F-Type and F-Pace SVR — offer solid headroom for Stage 1.
Jaguar uses the ZF 8HP, a premium 8-speed automatic.
Frequently asked questions
How many horsepower does the Jaguar XE 2.0T 300 hp reach after a remap?
Stage 1 chip tuning on the Jaguar XE 2.0T 300 hp boosts engine output by 25 hp: from 300 to 325 hp. Torque rises from 400 to 480 Nm (+80 Nm).
What changes in the Jaguar XE ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Jaguar XE with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Jaguar XE?
Stage 1 on the powerful Jaguar XE 2.0T 300 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Jaguar XE 2.0T 300 hp?
Stage 2 for the Jaguar XE 2.0T 300 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Jaguar XE 2.0T 300 hp use?
The Jaguar XE 2.0T 300 hp is fitted with the Bosch MED17.9.9 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
What does remapping the ZF 8HPxx gearbox give on the Jaguar XE 2.0T 300 hp?
The ZF 8HPxx TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Jaguar XE remain valid after Stage 1?
After remapping the Jaguar XE, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Jaguar XE?
Reading and writing via OBD takes 25-30 minutes on the Jaguar XE. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Jaguar XE?
Before Stage 1 the original of the Jaguar XE 2.0T 300 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Jaguar XE 2.0T 300 hp cost?
The remap price for the Jaguar XE 2.0T 300 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.