Jaguar XE 2.0d 180 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Jaguar XE 2.0d 180 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Jaguar XE 2.0d 180 hp ECU
Jaguar XE (2015) 2.0d 180 hp — premium diesel engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 180 to 195 hp (+15 hp, +8%) and torque from 430 to 490 Nm (+60 Nm). ECU — Bosch MEDC17.9. Flashing method: OBD or Bench depending on the unit's protection. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A diesel built in 2015 — the Tricore ECU era; OBD flash works on most production revisions.
Jaguar Ingenium is JLR's modern modular engine family. Jaguar is a British premium manufacturer, founded in 1922. Jaguar has been part of Tata Motors via Jaguar Land Rover (JLR) since 2008. Ingenium Diesel is JLR's modern diesel range. DPF/SCR with AdBlue is standard on Euro-6 Jaguar diesels. Mid-range Jaguar diesels sit in the premium segment.
Stage 1 on Jaguar diesels delivers a noticeable torque gain. The Jaguar community is a premium chip tuning niche in the UK and Europe. Mid-range Jaguars are premium saloons with solid headroom for Stage 1.
Jaguar uses the ZF 8HP, a premium 8-speed automatic.
Frequently asked questions
How many horsepower does the Jaguar XE 2.0d 180 hp reach after a remap?
Stage 1 for the Jaguar XE 2.0d 180 hp adds +15 hp — power increases from 180 to 195 hp (+8%). Torque rises from 430 to 490 Nm (+60 Nm).
What does a Stage 1 remap of the Jaguar XE 2.0d 180 hp include?
Stage 1 on the Jaguar XE 2.0d 180 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +15 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0d 180 hp?
Stage 1 on the Jaguar XE 2.0d 180 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Jaguar XE 2.0d 180 hp?
Stage 2 for the Jaguar XE 2.0d 180 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Jaguar XE 2.0d 180 hp run?
The control unit of the Jaguar XE 2.0d 180 hp is the Bosch MEDC17.9. Before flashing, the engineer identifies the exact revision and selects the write method.
Does the ZF 8HPxx transmission need calibration after Stage 1 on the Jaguar XE?
Remapping the ZF 8HPxx gearbox is essential to fully unlock Stage 1 on the Jaguar XE 2.0d 180 hp. Without a TCU update the factory torque cap will choke the torque gain and shifts will become noticeably softer.
Does Stage 1 void the warranty on the Jaguar XE?
Stage 1 on the Jaguar XE voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Jaguar XE 2.0d 180 hp done?
The full remap cycle for the Jaguar XE — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Jaguar XE?
The original Jaguar XE ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Jaguar XE 2.0d 180 hp?
The cost of Stage 1 for the Jaguar XE 2.0d 180 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.