Jaguar XE 2.0d 163 hp — Stage 1 file (+32 hp)
hp
Stage 1 file for Jaguar XE 2.0d 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Jaguar XE 2.0d 163 hp ECU
Jaguar XE (2015) 2.0d 163 hp — premium diesel engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 163 to 195 hp (+32 hp, +20%) and torque from 380 to 490 Nm (+110 Nm). ECU — Bosch MEDC17.9. Flashing method: OBD or Bench depending on the unit's protection. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2015 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Jaguar is a British premium manufacturer, founded in 1922. Jaguar has been part of Tata Motors via Jaguar Land Rover (JLR) since 2008. Jaguar specialises in premium saloons, roadsters and SUVs. DPF/SCR with AdBlue is standard on Euro-6 Jaguar diesels. Mid-range Jaguar diesels sit in the premium segment. Ingenium Diesel is JLR's modern diesel range.
The Jaguar community is a premium chip tuning niche in the UK and Europe. Stage 1 on Jaguar diesels delivers a noticeable torque gain. Mid-range Jaguars are premium saloons with solid headroom for Stage 1.
Jaguar uses the ZF 8HP, a premium 8-speed automatic.
Frequently asked questions
How much does the power of the Jaguar XE 2.0d 163 hp increase after Stage 1?
After Stage 1 the power of the Jaguar XE 2.0d 163 hp rises from 163 to 195 hp, a gain of 32 hp (+20%). Torque rises from 380 to 490 Nm (+110 Nm).
How does Stage 1 differ from stock on the Jaguar XE?
Stage 1 is a software optimization of the factory ECU firmware of the Jaguar XE with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +32 hp with no hardware changes.
What is the risk of Stage 1 on the Jaguar XE 2.0d 163 hp?
A remap of the Jaguar XE 2.0d 163 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Jaguar XE 2.0d 163 hp?
Stage 2 on the Jaguar XE 2.0d 163 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Jaguar XE 2.0d 163 hp use?
The Jaguar XE 2.0d 163 hp is fitted with the Bosch MEDC17.9 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
What does remapping the ZF 8HPxx gearbox give on the Jaguar XE 2.0d 163 hp?
The ZF 8HPxx TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Jaguar XE remain valid after Stage 1?
After remapping the Jaguar XE, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Jaguar XE?
Reading and writing via OBD takes 25-30 minutes on the Jaguar XE. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Jaguar XE?
Before Stage 1 the original of the Jaguar XE 2.0d 163 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Jaguar XE 2.0d 163 hp cost?
The remap price for the Jaguar XE 2.0d 163 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.