Iveco EuroTech E30/5.9L 299hp (220kW) 1050Nm — Stage 1 file (+43 hp)
hp
Stage 1 file for Iveco EuroTech E30/5.9L 299hp (220kW) 1050Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Iveco EuroTech E30/5.9L 299hp (220kW) 1050Nm ECU
Iveco EuroTech (I) E30/5.9L 299hp (220kW) 1050Nm — commercial diesel engine of the commercial segment of the Iveco Group / CNH Industrial group (Италия, 1975). Stage 1 chip tuning raises power from 299 to 342 hp (+43 hp, +14%) and torque from 1050 to 1200 Nm (+150 Nm).
Iveco is part of the Iveco Group (spun off from CNH Industrial in 2022). The Iveco Daily is a high-volume commercial van in Europe. The Iveco Stralis and S-Way are long-haul tractor units. The factory calibration is conservative, leaving headroom for Stage 1 while preserving engine life. Truck chip tuning is a discipline of its own, focused on fuel consumption and pulling power rather than peak output. DPF/SCR with AdBlue is standard on modern Euro-6 truck engines.
The professional logistics segment tunes for fuel consumption and pulling characteristics. The truck chip tuning community is an industry of its own, focused on long-haul routes. On high-output trucks, Stage 1 reduces fuel consumption under load. High-output MAN units are long-haul tractors with solid headroom for Stage 1.
Frequently asked questions
How much does the power of the Iveco EuroTech E30/5.9L 299hp (220kW) 1050Nm increase after Stage 1?
Stage 1 for the Iveco EuroTech E30/5.9L 299hp (220kW) 1050Nm adds +43 hp — power increases from 299 to 342 hp (+14%). Torque rises from 1050 to 1200 Nm (+150 Nm).
What does a Stage 1 remap of the Iveco EuroTech E30/5.9L 299hp (220kW) 1050Nm include?
Stage 1 chip tuning of the Iveco EuroTech is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +43 hp with no hardware changes.
Is Stage 1 safe on the high-output Iveco EuroTech E30/5.9L 299hp (220kW) 1050Nm?
Stage 1 on the powerful Iveco EuroTech E30/5.9L 299hp (220kW) 1050Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How much does Stage 2 add on the Iveco EuroTech?
Stage 2 for the Iveco EuroTech E30/5.9L 299hp (220kW) 1050Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What happens to the Iveco EuroTech warranty after chip tuning?
The factory warranty of the Iveco EuroTech does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Iveco EuroTech take?
On the Iveco EuroTech E30/5.9L 299hp (220kW) 1050Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Iveco EuroTech?
Yes, the original ECU firmware of the Iveco EuroTech E30/5.9L 299hp (220kW) 1050Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Iveco EuroTech?
Stage 1 for the Iveco EuroTech E30/5.9L 299hp (220kW) 1050Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.