Iveco Daily 3.0 HPT 204 hp — Stage 1 file (+46 hp)
hp
Stage 1 file for Iveco Daily 3.0 HPT 204 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Iveco Daily 3.0 HPT 204 hp ECU
Iveco Daily (2011) 3.0 HPT 204 hp — commercial diesel engine of the passenger segment of the Iveco Group / CNH Industrial group (Италия, 1975). Stage 1 chip tuning raises power from 204 to 250 hp (+46 hp, +23%) and torque from 470 to 560 Nm (+90 Nm). This engine ships with different ECU variants: Bosch EDC17C49, Bosch EDC17CP52. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HP70 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2011 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Iveco is an Italian manufacturer of trucks and commercial vehicles, founded in 1975. Iveco is part of the Iveco Group (spun off from CNH Industrial in 2022). The Iveco Daily is a high-volume commercial van in Europe. Truck chip tuning is a discipline of its own, focused on fuel consumption and pulling power rather than peak output. DPF/SCR with AdBlue is standard on modern Euro-6 truck engines. Truck diesels carry an extended set of maps for commercial load, with the focus on torque.
On high-output trucks, Stage 1 reduces fuel consumption under load. The professional logistics segment tunes for fuel consumption and pulling characteristics. The truck chip tuning community is an industry of its own, focused on long-haul routes. High-output MAN units are long-haul tractors with solid headroom for Stage 1.
TipMatic is MAN's proprietary automated gearbox. The TCU on trucks needs recalibration at Stage 1+. MAN uses ZF-series and its own TipMatic gearboxes.
Frequently asked questions
What is the Stage 1 effect on the Iveco Daily 3.0 HPT 204 hp?
The Stage 1 gain for the Iveco Daily 3.0 HPT 204 hp is 46 hp (+23%) over the stock 204 hp, for a total of 250 hp. Torque rises from 470 to 560 Nm (+90 Nm).
What is Stage 1 chip tuning for the Iveco Daily?
Stage 1 is a software optimization of the factory ECU firmware of the Iveco Daily with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +46 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Iveco Daily?
The high-output Iveco Daily 3.0 HPT 204 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Iveco Daily 3.0 HPT 204 hp?
Stage 2 on the Iveco Daily 3.0 HPT 204 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Iveco Daily 3.0 HPT 204 hp built with?
The Iveco Daily 3.0 HPT 204 hp comes with 2 ECU variants: Bosch EDC17C49, Bosch EDC17CP52. Calibration is done for the specific unit after the revision is identified.
What does remapping the ZF 8HP70 gearbox give on the Iveco Daily 3.0 HPT 204 hp?
The ZF 8HP70 TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Iveco Daily remain valid after Stage 1?
After remapping the Iveco Daily, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Iveco Daily?
Reading and writing via OBD takes 25-30 minutes on the Iveco Daily. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Iveco Daily?
Before Stage 1 the original of the Iveco Daily 3.0 HPT 204 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Iveco Daily 3.0 HPT 204 hp cost?
The remap price for the Iveco Daily 3.0 HPT 204 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.