Iveco Cursor Cursor13 - 540 12.9 540hp (397kW) 2350Nm — Stage 1 file (+79 hp)
hp
Stage 1 file for Iveco Cursor Cursor13 - 540 12.9 540hp (397kW) 2350Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Iveco Cursor Cursor13 - 540 12.9 540hp (397kW) 2350Nm ECU
Iveco Cursor (I) Cursor13 - 540 12.9 540hp (397kW) 2350Nm — commercial diesel engine of the commercial segment of the Iveco Group / CNH Industrial group (Италия, 1975). Stage 1 chip tuning raises power from 540 to 619 hp (+79 hp, +15%) and torque from 2350 to 2580 Nm (+230 Nm).
Iveco is part of the Iveco Group (spun off from CNH Industrial in 2022). The Iveco Daily is a high-volume commercial van in Europe. The Iveco Stralis and S-Way are long-haul tractor units. DPF/SCR with AdBlue is standard on modern Euro-6 truck engines. Truck diesels carry an extended set of maps for commercial load, with the focus on torque. The Cursor 8/9/11 are for heavy trucks and special machinery.
The truck chip tuning community is an industry of its own, focused on long-haul routes. The professional logistics segment tunes for fuel consumption and pulling characteristics. Top MAN units sit at the power ceiling of the European truck segment.
Frequently asked questions
How many horsepower does the Iveco Cursor Cursor13 - 540 12.9 540hp (397kW) 2350Nm reach after a remap?
Stage 1 chip tuning on the Iveco Cursor Cursor13 - 540 12.9 540hp (397kW) 2350Nm boosts engine output by 79 hp: from 540 to 619 hp. Torque rises from 2350 to 2580 Nm (+230 Nm).
What changes in the Iveco Cursor ECU after Stage 1?
Stage 1 chip tuning of the Iveco Cursor is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +79 hp with no hardware changes.
What is the Stage 1 potential of the Iveco Cursor Cursor13 - 540 12.9 540hp (397kW) 2350Nm?
On the top-spec Iveco Cursor Cursor13 - 540 12.9 540hp (397kW) 2350Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How much does Stage 2 add on the Iveco Cursor?
Stage 2 for the Iveco Cursor Cursor13 - 540 12.9 540hp (397kW) 2350Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What happens to the Iveco Cursor warranty after chip tuning?
The factory warranty of the Iveco Cursor does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Iveco Cursor take?
On the Iveco Cursor Cursor13 - 540 12.9 540hp (397kW) 2350Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Iveco Cursor?
Yes, the original ECU firmware of the Iveco Cursor Cursor13 - 540 12.9 540hp (397kW) 2350Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Iveco Cursor?
Stage 1 for the Iveco Cursor Cursor13 - 540 12.9 540hp (397kW) 2350Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.