Iveco Cursor Cursor13 - 380 12.9 380hp (279kW) 1800Nm — Stage 1 file (+59 hp)
hp
Stage 1 file for Iveco Cursor Cursor13 - 380 12.9 380hp (279kW) 1800Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Iveco Cursor Cursor13 - 380 12.9 380hp (279kW) 1800Nm ECU
Iveco Cursor (I) Cursor13 - 380 12.9 380hp (279kW) 1800Nm — commercial diesel engine of the commercial segment of the Iveco Group / CNH Industrial group (Италия, 1975). Stage 1 chip tuning raises power from 380 to 439 hp (+59 hp, +16%) and torque from 1800 to 1990 Nm (+190 Nm).
Cursor is the range of Iveco/CNH commercial diesel engines. Iveco shares some engines with Case and New Holland within CNH/FPT. Iveco is an Italian manufacturer of trucks and commercial vehicles, founded in 1975. The Iveco Daily is a mainstay of Europe's camper and delivery industry. Mid-generation truck models use standard OBD read/write. Top diesels in long-haul tractors sit at the power ceiling, and Stage 2 requires hardware.
The professional logistics segment tunes for fuel consumption and pulling characteristics. The truck chip tuning community is an industry of its own, focused on long-haul routes. Top MAN units sit at the power ceiling of the European truck segment.
Frequently asked questions
How much horsepower does Stage 1 add for the Iveco Cursor Cursor13 - 380 12.9 380hp (279kW) 1800Nm?
The Stage 1 gain for the Iveco Cursor Cursor13 - 380 12.9 380hp (279kW) 1800Nm is 59 hp (+16%) over the stock 380 hp, for a total of 439 hp. Torque rises from 1800 to 1990 Nm (+190 Nm).
What is Stage 1 chip tuning for the Iveco Cursor?
Stage 1 chip tuning of the Iveco Cursor is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +59 hp with no hardware changes.
What is the Stage 1 potential of the Iveco Cursor Cursor13 - 380 12.9 380hp (279kW) 1800Nm?
Stage 1 for the Iveco Cursor Cursor13 - 380 12.9 380hp (279kW) 1800Nm unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How much does Stage 2 add on the Iveco Cursor?
Stage 2 on the Iveco Cursor Cursor13 - 380 12.9 380hp (279kW) 1800Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What happens to the Iveco Cursor warranty after chip tuning?
The factory warranty of the Iveco Cursor does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Iveco Cursor take?
On the Iveco Cursor Cursor13 - 380 12.9 380hp (279kW) 1800Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Iveco Cursor?
Yes, the original ECU firmware of the Iveco Cursor Cursor13 - 380 12.9 380hp (279kW) 1800Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Iveco Cursor?
Stage 1 for the Iveco Cursor Cursor13 - 380 12.9 380hp (279kW) 1800Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.