Iveco Cursor Cursor10 - 400 400hp (294kW) 1900Nm — Stage 1 file (+68 hp)
hp
Stage 1 file for Iveco Cursor Cursor10 - 400 400hp (294kW) 1900Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Iveco Cursor Cursor10 - 400 400hp (294kW) 1900Nm ECU
Iveco Cursor (I) Cursor10 - 400 400hp (294kW) 1900Nm — commercial diesel engine of the commercial segment of the Iveco Group / CNH Industrial group (Италия, 1975). Stage 1 chip tuning raises power from 400 to 468 hp (+68 hp, +17%) and torque from 1900 to 2100 Nm (+200 Nm).
Iveco is part of the Iveco Group (spun off from CNH Industrial in 2022). The Iveco Daily is a high-volume commercial van in Europe. The Iveco Stralis and S-Way are long-haul tractor units. The Cursor 8/9/11 are for heavy trucks and special machinery. The Iveco Daily is a mainstay of Europe's camper and delivery industry. Mid-generation truck models use standard OBD read/write.
The truck chip tuning community is an industry of its own, focused on long-haul routes. The professional logistics segment tunes for fuel consumption and pulling characteristics. Top MAN units sit at the power ceiling of the European truck segment.
Frequently asked questions
How much does the power of the Iveco Cursor Cursor10 - 400 400hp (294kW) 1900Nm increase after Stage 1?
Stage 1 for the Iveco Cursor Cursor10 - 400 400hp (294kW) 1900Nm adds +68 hp — power increases from 400 to 468 hp (+17%). Torque rises from 1900 to 2100 Nm (+200 Nm).
What does a Stage 1 remap of the Iveco Cursor Cursor10 - 400 400hp (294kW) 1900Nm include?
Stage 1 chip tuning of the Iveco Cursor is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +68 hp with no hardware changes.
What is the Stage 1 potential of the Iveco Cursor Cursor10 - 400 400hp (294kW) 1900Nm?
On the top-spec Iveco Cursor Cursor10 - 400 400hp (294kW) 1900Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How much does Stage 2 add on the Iveco Cursor?
Stage 2 for the Iveco Cursor Cursor10 - 400 400hp (294kW) 1900Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What happens to the Iveco Cursor warranty after chip tuning?
The factory warranty of the Iveco Cursor does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Iveco Cursor take?
On the Iveco Cursor Cursor10 - 400 400hp (294kW) 1900Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Iveco Cursor?
Yes, the original ECU firmware of the Iveco Cursor Cursor10 - 400 400hp (294kW) 1900Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Iveco Cursor?
Stage 1 for the Iveco Cursor Cursor10 - 400 400hp (294kW) 1900Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.