Infiniti Q50 2.0t 211 hp — Stage 1 file (+39 hp)
hp
Stage 1 file for Infiniti Q50 2.0t 211 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Infiniti Q50 2.0t 211 hp ECU
Infiniti Q50 (2016) 2.0t 211 hp — premium petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Япония, 1933). Stage 1 chip tuning raises power from 211 to 250 hp (+39 hp, +18%) and torque from 350 to 400 Nm (+50 Nm). ECU — Bosch MED17.7.2. Flashing method: OBD or Bench depending on the unit's protection. The 2016 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Infiniti shares platforms and engines with Nissan's premium segment. Infiniti is part of the Renault-Nissan-Mitsubishi Alliance via Nissan. Infiniti is Nissan's premium sub-brand, launched in 1989 for North America. Nismo is Nissan's performance division, the equivalent of AMG/M. The GT-R is Nissan's flagship supercar with a BiTurbo V6. Nissan's petrol range covers mainstream turbocharged and naturally aspirated engines.
The Nissan community in the JDM segment is the world's largest for the GT-R. The GT-R community is an industry of its own with ready-made Stage files. High-output Nissan models deliver a solid gain with Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the Infiniti Q50 2.0t 211 hp?
The Stage 1 gain for the Infiniti Q50 2.0t 211 hp is 39 hp (+18%) over the stock 211 hp, for a total of 250 hp. Torque rises from 350 to 400 Nm (+50 Nm).
What is Stage 1 chip tuning for the Infiniti Q50?
Stage 1 on the Infiniti Q50 2.0t 211 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +39 hp with no hardware changes.
What does Stage 1 give on the powerful Infiniti Q50 2.0t 211 hp?
The high-output Infiniti Q50 2.0t 211 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Infiniti Q50 2.0t 211 hp?
Stage 2 on the Infiniti Q50 2.0t 211 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Infiniti Q50 2.0t 211 hp run?
The control unit of the Infiniti Q50 2.0t 211 hp is the Bosch MED17.7.2. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Infiniti Q50?
Stage 1 on the Infiniti Q50 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Infiniti Q50 2.0t 211 hp done?
The full remap cycle for the Infiniti Q50 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Infiniti Q50?
The original Infiniti Q50 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Infiniti Q50 2.0t 211 hp?
The cost of Stage 1 for the Infiniti Q50 2.0t 211 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.