Infiniti EX 30d (3.0d V6) 238 hp — Stage 1 file (+32 hp)
hp
Stage 1 file for Infiniti EX 30d (3.0d V6) 238 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Infiniti EX 30d (3.0d V6) 238 hp ECU
Infiniti EX (2008) 30d (3.0d V6) 238 hp — premium diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Япония, 1933). Stage 1 chip tuning raises power from 238 to 270 hp (+32 hp, +13%) and torque from 550 to 600 Nm (+50 Nm). ECU — Bosch EDC16CP42. Flashing method: OBD or Bench depending on the unit's protection. The 2008 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Infiniti is Nissan's premium sub-brand, launched in 1989 for North America. The Infiniti range comprises premium saloons, crossovers and coupes. Infiniti shares platforms and engines with Nissan's premium segment. Nissan uses Renault dCi diesels on its European passenger-car models. High-output Nissan diesels power the commercial-segment Patrol and Navara. DPF/SCR with AdBlue is standard on Euro-6 Nissan diesels.
The Nissan community in the JDM segment is the world's largest for the GT-R. The GT-R community is an industry of its own with ready-made Stage files. High-output Nissan models deliver a solid gain with Stage 1.
Frequently asked questions
How many horsepower does the Infiniti EX 30d (3.0d V6) 238 hp reach after a remap?
After Stage 1 the power of the Infiniti EX 30d (3.0d V6) 238 hp rises from 238 to 270 hp, a gain of 32 hp (+13%). Torque rises from 550 to 600 Nm (+50 Nm).
How does Stage 1 differ from stock on the Infiniti EX?
Stage 1 on the Infiniti EX 30d (3.0d V6) 238 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +32 hp with no hardware changes.
What does Stage 1 give on the powerful Infiniti EX 30d (3.0d V6) 238 hp?
The high-output Infiniti EX 30d (3.0d V6) 238 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Infiniti EX 30d (3.0d V6) 238 hp?
Stage 2 on the Infiniti EX 30d (3.0d V6) 238 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Infiniti EX 30d (3.0d V6) 238 hp run?
The control unit of the Infiniti EX 30d (3.0d V6) 238 hp is the Bosch EDC16CP42. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Infiniti EX?
Stage 1 on the Infiniti EX voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Infiniti EX 30d (3.0d V6) 238 hp done?
The full remap cycle for the Infiniti EX — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Infiniti EX?
The original Infiniti EX ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Infiniti EX 30d (3.0d V6) 238 hp?
The cost of Stage 1 for the Infiniti EX 30d (3.0d V6) 238 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.