Hyundai XCent 1.1 CRDI EU6 75 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Hyundai XCent 1.1 CRDI EU6 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai XCent 1.1 CRDI EU6 75 hp ECU
Hyundai XCent (2014) 1.1 CRDI EU6 75 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 75 to 100 hp (+25 hp, +33%) and torque from 180 to 210 Nm (+30 Nm). ECU — Delphi DCM6.2AP. Flashing method: OBD or Bench depending on the unit's protection. The 2014 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The Hyundai range covers compacts, saloons, crossovers, SUVs and commercial vehicles (HD). The Hyundai diesel range is shared with Kia and Genesis within the group.
On older-generation Hyundais, Stage 1 goes in over OBD without Bench. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. Low-output Hyundai engines are city units, and Stage 1 is safe. On naturally aspirated Hyundai engines, the main effect is on throttle response.
Frequently asked questions
How many horsepower does the Hyundai XCent 1.1 CRDI EU6 75 hp reach after a remap?
After Stage 1 the power of the Hyundai XCent 1.1 CRDI EU6 75 hp rises from 75 to 100 hp, a gain of 25 hp (+33%). Torque rises from 180 to 210 Nm (+30 Nm).
How does Stage 1 differ from stock on the Hyundai XCent?
Stage 1 is a software optimization of the factory ECU firmware of the Hyundai XCent with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Is Stage 1 worth doing on the base Hyundai XCent?
Stage 1 on the base Hyundai XCent is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Hyundai XCent 1.1 CRDI EU6 75 hp?
Stage 2 on the Hyundai XCent 1.1 CRDI EU6 75 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Hyundai XCent 1.1 CRDI EU6 75 hp use?
The Hyundai XCent 1.1 CRDI EU6 75 hp is fitted with the Delphi DCM6.2AP ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Hyundai XCent remain valid after Stage 1?
After remapping the Hyundai XCent, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Hyundai XCent?
Reading and writing via OBD takes 25-30 minutes on the Hyundai XCent. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Hyundai XCent?
Before Stage 1 the original of the Hyundai XCent 1.1 CRDI EU6 75 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Hyundai XCent 1.1 CRDI EU6 75 hp cost?
The remap price for the Hyundai XCent 1.1 CRDI EU6 75 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.