Hyundai Venue 1.6 MPI 123 hp — Stage 1 file (+3 hp)
hp
Stage 1 file for Hyundai Venue 1.6 MPI 123 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Venue 1.6 MPI 123 hp ECU
Hyundai Venue (2019) 1.6 MPI 123 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 123 to 126 hp (+3 hp, +2%) and torque from 144 to 150 Nm (+6 Nm). ECU — Kefico CPEGP3.20.1. Flashing method: OBD or Bench depending on the unit's protection. A 2019 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
N is Hyundai's performance division (i30 N, Elantra N, Kona N). Smartstream is Hyundai's modern engine range with an emphasis on economy. The Hyundai N-series are sporting turbo engines for the i30 N, Elantra N and Kona N. Hyundai's factory calibration is mainstream and leaves headroom for Stage 1.
Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on the Hyundai T-GDI delivers a noticeable gain. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe.
Frequently asked questions
What is the Stage 1 effect on the Hyundai Venue 1.6 MPI 123 hp?
Stage 1 chip tuning on the Hyundai Venue 1.6 MPI 123 hp boosts engine output by 3 hp: from 123 to 126 hp. Torque rises from 144 to 150 Nm (+6 Nm).
What changes in the Hyundai Venue ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Hyundai Venue with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +3 hp with no hardware changes.
What is the risk of Stage 1 on the Hyundai Venue 1.6 MPI 123 hp?
A remap of the Hyundai Venue 1.6 MPI 123 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Hyundai Venue 1.6 MPI 123 hp?
Stage 2 for the Hyundai Venue 1.6 MPI 123 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Hyundai Venue 1.6 MPI 123 hp use?
The Hyundai Venue 1.6 MPI 123 hp is fitted with the Kefico CPEGP3.20.1 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Hyundai Venue remain valid after Stage 1?
After remapping the Hyundai Venue, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Hyundai Venue?
Reading and writing via OBD takes 25-30 minutes on the Hyundai Venue. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Hyundai Venue?
Before Stage 1 the original of the Hyundai Venue 1.6 MPI 123 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Hyundai Venue 1.6 MPI 123 hp cost?
The remap price for the Hyundai Venue 1.6 MPI 123 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.