Hyundai Veloster 1.6 MPI 130 hp — Stage 1 file (+10 hp)
hp
Stage 1 file for Hyundai Veloster 1.6 MPI 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Veloster 1.6 MPI 130 hp ECU
Hyundai Veloster (2011) 1.6 MPI 130 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 130 to 140 hp (+10 hp, +8%) and torque from 157 to 172 Nm (+15 Nm). This engine ships with different ECU variants: Bosch ME17.9.1, Bosch MED17.9.8. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2011 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
The Hyundai Motor Group also includes Kia and the premium Genesis sub-brand. Hyundai turbo petrol engines deliver a noticeable gain with Stage 1. Smartstream is Hyundai's modern engine range with an emphasis on economy. Hyundai's factory calibration is mainstream and leaves headroom for Stage 1.
On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
What is the Stage 1 effect on the Hyundai Veloster 1.6 MPI 130 hp?
The Stage 1 gain for the Hyundai Veloster 1.6 MPI 130 hp is 10 hp (+8%) over the stock 130 hp, for a total of 140 hp. Torque rises from 157 to 172 Nm (+15 Nm).
What is Stage 1 chip tuning for the Hyundai Veloster?
Stage 1 chip tuning of the Hyundai Veloster is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +10 hp with no hardware changes.
Can you do Stage 1 on the Hyundai Veloster 1.6 MPI 130 hp?
Yes, Stage 1 for the Hyundai Veloster 1.6 MPI 130 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Hyundai Veloster?
Stage 2 on the Hyundai Veloster 1.6 MPI 130 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Hyundai Veloster 1.6 MPI 130 hp?
The Hyundai Veloster 1.6 MPI 130 hp was fitted with different ECUs depending on the year and trim: Bosch ME17.9.1, Bosch MED17.9.8. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Hyundai Veloster warranty after chip tuning?
The factory warranty of the Hyundai Veloster does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Hyundai Veloster take?
On the Hyundai Veloster 1.6 MPI 130 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Hyundai Veloster?
Yes, the original ECU firmware of the Hyundai Veloster 1.6 MPI 130 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Hyundai Veloster?
Stage 1 for the Hyundai Veloster 1.6 MPI 130 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.