Hyundai Staria 1.6 T-GDI hybrid 225 hp — Stage 1 file (+20 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Hyundai Staria 1.6 T-GDI hybrid 225 hp ECU

Hyundai Staria (2021 - US4) 1.6 T-GDI hybrid 225 hp — mass-market hybrid engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 225 to 245 hp (+20 hp, +9%) and torque from 367 to 422 Nm (+55 Nm).

Hyundai is the core of the Hyundai Motor Group. IONIQ is a dedicated full-EV Hyundai line. Hyundai PHEV variants combine a T-GDI engine with an electric motor. Full-EV Hyundais keep the inverter and BMS locked.

Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. Protection on modern Hyundai N models is tough and requires Bench. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. High-output Hyundais are the N-series and Santa Fe, with solid headroom for Stage 1.

Frequently asked questions

How much horsepower does Stage 1 add for the Hyundai Staria 1.6 T-GDI hybrid 225 hp?

Stage 1 for the Hyundai Staria 1.6 T-GDI hybrid 225 hp adds +20 hp — power increases from 225 to 245 hp (+9%). Torque rises from 367 to 422 Nm (+55 Nm).

What does a Stage 1 remap of the Hyundai Staria 1.6 T-GDI hybrid 225 hp include?

Stage 1 on the Hyundai Staria 1.6 T-GDI hybrid 225 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.

What does Stage 1 give on the powerful Hyundai Staria 1.6 T-GDI hybrid 225 hp?

Stage 1 on the powerful Hyundai Staria 1.6 T-GDI hybrid 225 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).

How does Stage 2 differ from Stage 1 on the Hyundai Staria 1.6 T-GDI hybrid 225 hp?

Stage 2 for the Hyundai Staria 1.6 T-GDI hybrid 225 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.

Does Stage 1 void the warranty on the Hyundai Staria?

Stage 1 on the Hyundai Staria voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Hyundai Staria 1.6 T-GDI hybrid 225 hp done?

The full remap cycle for the Hyundai Staria — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Hyundai Staria?

The original Hyundai Staria ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Hyundai Staria 1.6 T-GDI hybrid 225 hp?

The cost of Stage 1 for the Hyundai Staria 1.6 T-GDI hybrid 225 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno