Hyundai Sonata 2.4 MPI 179 hp — Stage 1 file (+6 hp)
hp
Stage 1 file for Hyundai Sonata 2.4 MPI 179 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Sonata 2.4 MPI 179 hp ECU
Hyundai Sonata (2014 - LF) 2.4 MPI 179 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 179 to 185 hp (+6 hp, +3%) and torque from 230 to 235 Nm (+5 Nm). This engine ships with different ECU variants: Siemens/Continental SIM2K-141, Siemens/Continental SIM2K-142, Siemens/Continental SIM2K-240, Siemens/Continental SIM2K-241, Siemens/Continental SIM2K-341. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 5 configurations · 5 ECU variants. The 2014 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Hyundai is a Korean carmaker, founded in 1967 in Seoul. The Hyundai N-series are sporting turbo engines for the i30 N, Elantra N and Kona N. Hyundai turbo petrol engines deliver a noticeable gain with Stage 1. Smartstream is Hyundai's modern engine range with an emphasis on economy.
The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on the Hyundai T-GDI delivers a noticeable gain. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
How much does the power of the Hyundai Sonata 2.4 MPI 179 hp increase after Stage 1?
After Stage 1 the power of the Hyundai Sonata 2.4 MPI 179 hp rises from 179 to 185 hp, a gain of 6 hp (+3%). Torque rises from 230 to 235 Nm (+5 Nm).
How does Stage 1 differ from stock on the Hyundai Sonata?
Stage 1 is a software optimization of the factory ECU firmware of the Hyundai Sonata with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +6 hp with no hardware changes.
What is the risk of Stage 1 on the Hyundai Sonata 2.4 MPI 179 hp?
A remap of the Hyundai Sonata 2.4 MPI 179 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Hyundai Sonata 2.4 MPI 179 hp?
Stage 2 on the Hyundai Sonata 2.4 MPI 179 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Hyundai Sonata 2.4 MPI 179 hp built with?
The Hyundai Sonata 2.4 MPI 179 hp comes with 5 ECU variants: Siemens/Continental SIM2K-141, Siemens/Continental SIM2K-142, Siemens/Continental SIM2K-240, Siemens/Continental SIM2K-241, Siemens/Continental SIM2K-341. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Hyundai Sonata remain valid after Stage 1?
After remapping the Hyundai Sonata, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Hyundai Sonata?
Reading and writing via OBD takes 25-30 minutes on the Hyundai Sonata. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Hyundai Sonata?
Before Stage 1 the original of the Hyundai Sonata 2.4 MPI 179 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Hyundai Sonata 2.4 MPI 179 hp cost?
The remap price for the Hyundai Sonata 2.4 MPI 179 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.