Hyundai Solaris 1.6 MPI (2014) 123 hp — Stage 1 file (+7 hp)
hp
Stage 1 file for Hyundai Solaris 1.6 MPI (2014) 123 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Solaris 1.6 MPI (2014) 123 hp ECU
Hyundai Solaris (2017) 1.6 MPI (2014) 123 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 123 to 130 hp (+7 hp, +6%) and torque from 151 to 156 Nm (+5 Nm). ECU — Kefico MEG17.9.12. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
The Hyundai range covers compacts, saloons, crossovers, SUVs and commercial vehicles (HD). Smartstream is Hyundai's modern engine range with an emphasis on economy. Hyundai's factory calibration is mainstream and leaves headroom for Stage 1. T-GDI is Hyundai's badge for its direct-injection turbo petrol engines.
On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
What power gain do you get after chip tuning the Hyundai Solaris 1.6 MPI (2014) 123 hp?
The Stage 1 gain for the Hyundai Solaris 1.6 MPI (2014) 123 hp is 7 hp (+6%) over the stock 123 hp, for a total of 130 hp. Torque rises from 151 to 156 Nm (+5 Nm).
What is Stage 1 chip tuning for the Hyundai Solaris?
Stage 1 is a software optimization of the factory ECU firmware of the Hyundai Solaris with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +7 hp with no hardware changes.
What is the risk of Stage 1 on the Hyundai Solaris 1.6 MPI (2014) 123 hp?
A remap of the Hyundai Solaris 1.6 MPI (2014) 123 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Hyundai Solaris 1.6 MPI (2014) 123 hp?
Stage 2 on the Hyundai Solaris 1.6 MPI (2014) 123 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Hyundai Solaris 1.6 MPI (2014) 123 hp use?
The Hyundai Solaris 1.6 MPI (2014) 123 hp is fitted with the Kefico MEG17.9.12 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Hyundai Solaris remain valid after Stage 1?
After remapping the Hyundai Solaris, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Hyundai Solaris?
Reading and writing via OBD takes 25-30 minutes on the Hyundai Solaris. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Hyundai Solaris?
Before Stage 1 the original of the Hyundai Solaris 1.6 MPI (2014) 123 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Hyundai Solaris 1.6 MPI (2014) 123 hp cost?
The remap price for the Hyundai Solaris 1.6 MPI (2014) 123 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.