Hyundai Santa Fe 2.0 CRDI 125 hp — Stage 1 file (+28 hp)
hp
Stage 1 file for Hyundai Santa Fe 2.0 CRDI 125 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Santa Fe 2.0 CRDI 125 hp ECU
Hyundai Santa Fe (2005 - CM) 2.0 CRDI 125 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 125 to 153 hp (+28 hp, +22%) and torque from 285 to 330 Nm (+45 Nm). ECU — Bosch EDC15C7. Flashing method: OBD or Bench depending on the unit's protection. The 2005 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Hyundai is a Korean carmaker, founded in 1967 in Seoul. DPF/SCR with AdBlue is standard on Euro-6 Hyundai diesels.
Stage 1 on a mid-range Hyundai CRDi delivers a noticeable torque gain. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
How much does the power of the Hyundai Santa Fe 2.0 CRDI 125 hp increase after Stage 1?
The Stage 1 gain for the Hyundai Santa Fe 2.0 CRDI 125 hp is 28 hp (+22%) over the stock 125 hp, for a total of 153 hp. Torque rises from 285 to 330 Nm (+45 Nm).
What is Stage 1 chip tuning for the Hyundai Santa Fe?
Stage 1 is a software optimization of the factory ECU firmware of the Hyundai Santa Fe with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +28 hp with no hardware changes.
What is the risk of Stage 1 on the Hyundai Santa Fe 2.0 CRDI 125 hp?
A remap of the Hyundai Santa Fe 2.0 CRDI 125 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Hyundai Santa Fe 2.0 CRDI 125 hp?
Stage 2 on the Hyundai Santa Fe 2.0 CRDI 125 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Hyundai Santa Fe 2.0 CRDI 125 hp use?
The Hyundai Santa Fe 2.0 CRDI 125 hp is fitted with the Bosch EDC15C7 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Hyundai Santa Fe remain valid after Stage 1?
After remapping the Hyundai Santa Fe, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Hyundai Santa Fe?
Reading and writing via OBD takes 25-30 minutes on the Hyundai Santa Fe. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Hyundai Santa Fe?
Before Stage 1 the original of the Hyundai Santa Fe 2.0 CRDI 125 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Hyundai Santa Fe 2.0 CRDI 125 hp cost?
The remap price for the Hyundai Santa Fe 2.0 CRDI 125 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.