Hyundai Kona 1.6 T-GDI (2023) 198 hp — Stage 1 file (+37 hp)
hp
Stage 1 file for Hyundai Kona 1.6 T-GDI (2023) 198 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Kona 1.6 T-GDI (2023) 198 hp ECU
Hyundai Kona (2023 - SX2) 1.6 T-GDI (2023) 198 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 198 to 235 hp (+37 hp, +19%) and torque from 265 to 340 Nm (+75 Nm). ECU — Kefico CPEGP3.20.1. Flashing method: OBD or Bench depending on the unit's protection. A 2023 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Hyundai is the core of the Hyundai Motor Group. Hyundai's factory calibration is mainstream and leaves headroom for Stage 1. Hyundai turbo petrol engines deliver a noticeable gain with Stage 1. Modern Hyundai N engines usually require Bench.
Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on the Hyundai T-GDI delivers a noticeable gain. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe.
Frequently asked questions
What is the Stage 1 effect on the Hyundai Kona 1.6 T-GDI (2023) 198 hp?
Stage 1 chip tuning on the Hyundai Kona 1.6 T-GDI (2023) 198 hp boosts engine output by 37 hp: from 198 to 235 hp. Torque rises from 265 to 340 Nm (+75 Nm).
What changes in the Hyundai Kona ECU after Stage 1?
Stage 1 on the Hyundai Kona 1.6 T-GDI (2023) 198 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +37 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 T-GDI (2023) 198 hp?
Stage 1 on the Hyundai Kona 1.6 T-GDI (2023) 198 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Hyundai Kona 1.6 T-GDI (2023) 198 hp?
Stage 2 for the Hyundai Kona 1.6 T-GDI (2023) 198 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Hyundai Kona 1.6 T-GDI (2023) 198 hp run?
The control unit of the Hyundai Kona 1.6 T-GDI (2023) 198 hp is the Kefico CPEGP3.20.1. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Hyundai Kona?
Stage 1 on the Hyundai Kona voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Hyundai Kona 1.6 T-GDI (2023) 198 hp done?
The full remap cycle for the Hyundai Kona — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Hyundai Kona?
The original Hyundai Kona ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Hyundai Kona 1.6 T-GDI (2023) 198 hp?
The cost of Stage 1 for the Hyundai Kona 1.6 T-GDI (2023) 198 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.