Hyundai Kona 2.0T (N) Performance 280 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Hyundai Kona 2.0T (N) Performance 280 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Kona 2.0T (N) Performance 280 hp ECU
Hyundai Kona (2017 - OS) 2.0T (N) Performance 280 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 280 to 300 hp (+20 hp, +7%) and torque from 392 to 440 Nm (+48 Nm). ECU — Siemens/Continental SIM2K-250. Flashing method: OBD or Bench depending on the unit's protection. A petrol engine built in 2017 — a Tricore platform without strong protection; OBD access works.
Hyundai is a Korean carmaker, founded in 1967 in Seoul. Hyundai's factory calibration is mainstream and leaves headroom for Stage 1. T-GDI is Hyundai's badge for its direct-injection turbo petrol engines. The Hyundai N-series are sporting turbo engines for the i30 N, Elantra N and Kona N.
On older-generation Hyundais, Stage 1 goes in over OBD without Bench. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. High-output Hyundais are the N-series and Santa Fe, with solid headroom for Stage 1.
Frequently asked questions
How many horsepower does the Hyundai Kona 2.0T (N) Performance 280 hp reach after a remap?
Stage 1 chip tuning on the Hyundai Kona 2.0T (N) Performance 280 hp boosts engine output by 20 hp: from 280 to 300 hp. Torque rises from 392 to 440 Nm (+48 Nm).
What changes in the Hyundai Kona ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Hyundai Kona with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Hyundai Kona?
Stage 1 on the powerful Hyundai Kona 2.0T (N) Performance 280 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Hyundai Kona 2.0T (N) Performance 280 hp?
Stage 2 for the Hyundai Kona 2.0T (N) Performance 280 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Hyundai Kona 2.0T (N) Performance 280 hp use?
The Hyundai Kona 2.0T (N) Performance 280 hp is fitted with the Siemens/Continental SIM2K-250 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Hyundai Kona remain valid after Stage 1?
After remapping the Hyundai Kona, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Hyundai Kona?
Reading and writing via OBD takes 25-30 minutes on the Hyundai Kona. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Hyundai Kona?
Before Stage 1 the original of the Hyundai Kona 2.0T (N) Performance 280 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Hyundai Kona 2.0T (N) Performance 280 hp cost?
The remap price for the Hyundai Kona 2.0T (N) Performance 280 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.