Hyundai ix 45 2.2 CRDI EU6 200 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Hyundai ix 45 2.2 CRDI EU6 200 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai ix 45 2.2 CRDI EU6 200 hp ECU
Hyundai ix 45 (2012) 2.2 CRDI EU6 200 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 200 to 220 hp (+20 hp, +10%) and torque from 441 to 521 Nm (+80 Nm). ECU — Bosch EDC17C57. Flashing method: OBD or Bench depending on the unit's protection. The 2012 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Hyundai is a Korean carmaker, founded in 1967 in Seoul. DPF/SCR with AdBlue is standard on Euro-6 Hyundai diesels.
Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. High-output Hyundais are the N-series and Santa Fe, with solid headroom for Stage 1.
Frequently asked questions
How much does the power of the Hyundai ix 45 2.2 CRDI EU6 200 hp increase after Stage 1?
The Stage 1 gain for the Hyundai ix 45 2.2 CRDI EU6 200 hp is 20 hp (+10%) over the stock 200 hp, for a total of 220 hp. Torque rises from 441 to 521 Nm (+80 Nm).
What is Stage 1 chip tuning for the Hyundai ix 45?
Stage 1 on the Hyundai ix 45 2.2 CRDI EU6 200 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
What does Stage 1 give on the powerful Hyundai ix 45 2.2 CRDI EU6 200 hp?
The high-output Hyundai ix 45 2.2 CRDI EU6 200 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Hyundai ix 45 2.2 CRDI EU6 200 hp?
Stage 2 on the Hyundai ix 45 2.2 CRDI EU6 200 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Hyundai ix 45 2.2 CRDI EU6 200 hp run?
The control unit of the Hyundai ix 45 2.2 CRDI EU6 200 hp is the Bosch EDC17C57. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Hyundai ix 45?
Stage 1 on the Hyundai ix 45 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Hyundai ix 45 2.2 CRDI EU6 200 hp done?
The full remap cycle for the Hyundai ix 45 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Hyundai ix 45?
The original Hyundai ix 45 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Hyundai ix 45 2.2 CRDI EU6 200 hp?
The cost of Stage 1 for the Hyundai ix 45 2.2 CRDI EU6 200 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.