Hyundai ix 45 2.0 CRDI EU5 150 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Hyundai ix 45 2.0 CRDI EU5 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai ix 45 2.0 CRDI EU5 150 hp ECU
Hyundai ix 45 (2012) 2.0 CRDI EU5 150 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 150 to 180 hp (+30 hp, +20%) and torque from 383 to 420 Nm (+37 Nm). This engine ships with different ECU variants: Bosch EDC17C08, Bosch EDC17C53, Bosch EDC17CP14. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2012 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The Hyundai Motor Group also includes Kia and the premium Genesis sub-brand. The factory calibration on Hyundai diesels is conservative, leaving headroom for Stage 1.
On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
What is the Stage 1 effect on the Hyundai ix 45 2.0 CRDI EU5 150 hp?
The Stage 1 gain for the Hyundai ix 45 2.0 CRDI EU5 150 hp is 30 hp (+20%) over the stock 150 hp, for a total of 180 hp. Torque rises from 383 to 420 Nm (+37 Nm).
What is Stage 1 chip tuning for the Hyundai ix 45?
Stage 1 is a software optimization of the factory ECU firmware of the Hyundai ix 45 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Hyundai ix 45 2.0 CRDI EU5 150 hp?
A remap of the Hyundai ix 45 2.0 CRDI EU5 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Hyundai ix 45 2.0 CRDI EU5 150 hp?
Stage 2 on the Hyundai ix 45 2.0 CRDI EU5 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Hyundai ix 45 2.0 CRDI EU5 150 hp built with?
The Hyundai ix 45 2.0 CRDI EU5 150 hp comes with 3 ECU variants: Bosch EDC17C08, Bosch EDC17C53, Bosch EDC17CP14. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Hyundai ix 45 remain valid after Stage 1?
After remapping the Hyundai ix 45, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Hyundai ix 45?
Reading and writing via OBD takes 25-30 minutes on the Hyundai ix 45. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Hyundai ix 45?
Before Stage 1 the original of the Hyundai ix 45 2.0 CRDI EU5 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Hyundai ix 45 2.0 CRDI EU5 150 hp cost?
The remap price for the Hyundai ix 45 2.0 CRDI EU5 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.