Hyundai ix 35 2.0 CRDI EU6 136 hp — Stage 1 file (+39 hp)
hp
Stage 1 file for Hyundai ix 35 2.0 CRDI EU6 136 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai ix 35 2.0 CRDI EU6 136 hp ECU
Hyundai ix 35 (2016 - TL) 2.0 CRDI EU6 136 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 136 to 175 hp (+39 hp, +29%) and torque from 373 to 450 Nm (+77 Nm). ECU — Bosch EDC17C57. Flashing method: OBD or Bench depending on the unit's protection. The 2016 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The Hyundai range covers compacts, saloons, crossovers, SUVs and commercial vehicles (HD). The Hyundai diesel range is shared with Kia and Genesis within the group.
On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
What power gain do you get after chip tuning the Hyundai ix 35 2.0 CRDI EU6 136 hp?
The Stage 1 gain for the Hyundai ix 35 2.0 CRDI EU6 136 hp is 39 hp (+29%) over the stock 136 hp, for a total of 175 hp. Torque rises from 373 to 450 Nm (+77 Nm).
What is Stage 1 chip tuning for the Hyundai ix 35?
Stage 1 on the Hyundai ix 35 2.0 CRDI EU6 136 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +39 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 CRDI EU6 136 hp?
Stage 1 on the Hyundai ix 35 2.0 CRDI EU6 136 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Hyundai ix 35 2.0 CRDI EU6 136 hp?
Stage 2 on the Hyundai ix 35 2.0 CRDI EU6 136 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Hyundai ix 35 2.0 CRDI EU6 136 hp run?
The control unit of the Hyundai ix 35 2.0 CRDI EU6 136 hp is the Bosch EDC17C57. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Hyundai ix 35?
Stage 1 on the Hyundai ix 35 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Hyundai ix 35 2.0 CRDI EU6 136 hp done?
The full remap cycle for the Hyundai ix 35 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Hyundai ix 35?
The original Hyundai ix 35 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Hyundai ix 35 2.0 CRDI EU6 136 hp?
The cost of Stage 1 for the Hyundai ix 35 2.0 CRDI EU6 136 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.