Hyundai ix 20 1.4i 90 hp — Stage 1 file (+10 hp)
hp
Stage 1 file for Hyundai ix 20 1.4i 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai ix 20 1.4i 90 hp ECU
Hyundai ix 20 (2012) 1.4i 90 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 90 to 100 hp (+10 hp, +11%) and torque from 128 to 158 Nm (+30 Nm). This engine ships with different ECU variants: Bosch ME17.9.11, Bosch ME17.9.21, Bosch ME17.9.21.1. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. A petrol engine built in 2012 — a Tricore platform without strong protection; OBD access works.
Hyundai is the core of the Hyundai Motor Group. Low-output Hyundai petrol engines are naturally aspirated city units, so the gain is modest. Smartstream is Hyundai's modern engine range with an emphasis on economy. Hyundai's factory calibration is mainstream and leaves headroom for Stage 1.
The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. On naturally aspirated Hyundai engines, the main effect is on throttle response. Low-output Hyundai engines are city units, and Stage 1 is safe.
Frequently asked questions
What is the Stage 1 effect on the Hyundai ix 20 1.4i 90 hp?
Stage 1 chip tuning on the Hyundai ix 20 1.4i 90 hp boosts engine output by 10 hp: from 90 to 100 hp. Torque rises from 128 to 158 Nm (+30 Nm).
What changes in the Hyundai ix 20 ECU after Stage 1?
Stage 1 chip tuning of the Hyundai ix 20 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +10 hp with no hardware changes.
What does chip tuning give on the low-output Hyundai ix 20 1.4i 90 hp?
Yes, Stage 1 on the low-output Hyundai ix 20 1.4i 90 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
How much does Stage 2 add on the Hyundai ix 20?
Stage 2 for the Hyundai ix 20 1.4i 90 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Hyundai ix 20 1.4i 90 hp?
The Hyundai ix 20 1.4i 90 hp was fitted with different ECUs depending on the year and trim: Bosch ME17.9.11, Bosch ME17.9.21, Bosch ME17.9.21.1. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Hyundai ix 20 warranty after chip tuning?
The factory warranty of the Hyundai ix 20 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Hyundai ix 20 take?
On the Hyundai ix 20 1.4i 90 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Hyundai ix 20?
Yes, the original ECU firmware of the Hyundai ix 20 1.4i 90 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Hyundai ix 20?
Stage 1 for the Hyundai ix 20 1.4i 90 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.