Hyundai ix 20 1.4 CRDI EU5 90 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Hyundai ix 20 1.4 CRDI EU5 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai ix 20 1.4 CRDI EU5 90 hp ECU
Hyundai ix 20 (2012) 1.4 CRDI EU5 90 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 90 to 110 hp (+20 hp, +22%) and torque from 220 to 270 Nm (+50 Nm). This engine ships with different ECU variants: Delphi DCM3.7AP, Bosch EDC17C57. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A diesel built in 2012 — the Tricore ECU era; OBD flash works on most production revisions.
Hyundai is the core of the Hyundai Motor Group. The Hyundai community in Eastern Europe and the CIS does a large volume of diesel chip tuning.
Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. On naturally aspirated Hyundai engines, the main effect is on throttle response. Low-output Hyundai engines are city units, and Stage 1 is safe.
Frequently asked questions
What power gain do you get after chip tuning the Hyundai ix 20 1.4 CRDI EU5 90 hp?
Stage 1 for the Hyundai ix 20 1.4 CRDI EU5 90 hp adds +20 hp — power increases from 90 to 110 hp (+22%). Torque rises from 220 to 270 Nm (+50 Nm).
What does a Stage 1 remap of the Hyundai ix 20 1.4 CRDI EU5 90 hp include?
Stage 1 on the Hyundai ix 20 1.4 CRDI EU5 90 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is Stage 1 safe for the low-output Hyundai ix 20 1.4 CRDI EU5 90 hp?
Yes, Stage 1 on the low-output Hyundai ix 20 1.4 CRDI EU5 90 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
How does Stage 2 differ from Stage 1 on the Hyundai ix 20 1.4 CRDI EU5 90 hp?
Stage 2 for the Hyundai ix 20 1.4 CRDI EU5 90 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Hyundai ix 20 1.4 CRDI EU5 90 hp have?
The Hyundai ix 20 1.4 CRDI EU5 90 hp has 2 ECU variants: Delphi DCM3.7AP, Bosch EDC17C57. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Hyundai ix 20?
Stage 1 on the Hyundai ix 20 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Hyundai ix 20 1.4 CRDI EU5 90 hp done?
The full remap cycle for the Hyundai ix 20 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Hyundai ix 20?
The original Hyundai ix 20 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Hyundai ix 20 1.4 CRDI EU5 90 hp?
The cost of Stage 1 for the Hyundai ix 20 1.4 CRDI EU5 90 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.