Hyundai Imax 2.4 MPI 179 hp — Stage 1 file (+6 hp)
hp
Stage 1 file for Hyundai Imax 2.4 MPI 179 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Imax 2.4 MPI 179 hp ECU
Hyundai Imax (2012) 2.4 MPI 179 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 179 to 185 hp (+6 hp, +3%) and torque from 230 to 235 Nm (+5 Nm). This engine ships with different ECU variants: Siemens/Continental SIM2K-141, Siemens/Continental SIM2K-142, Siemens/Continental SIM2K-240, Siemens/Continental SIM2K-241, Siemens/Continental SIM2K-341. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 5 configurations · 5 ECU variants. A petrol engine built in 2012 — a Tricore platform without strong protection; OBD access works.
N is Hyundai's performance division (i30 N, Elantra N, Kona N). Hyundai's factory calibration is mainstream and leaves headroom for Stage 1. T-GDI is Hyundai's badge for its direct-injection turbo petrol engines. The Hyundai N-series are sporting turbo engines for the i30 N, Elantra N and Kona N.
Stage 1 on the Hyundai T-GDI delivers a noticeable gain. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe.
Frequently asked questions
How many horsepower does the Hyundai Imax 2.4 MPI 179 hp reach after a remap?
Stage 1 for the Hyundai Imax 2.4 MPI 179 hp adds +6 hp — power increases from 179 to 185 hp (+3%). Torque rises from 230 to 235 Nm (+5 Nm).
What does a Stage 1 remap of the Hyundai Imax 2.4 MPI 179 hp include?
Stage 1 chip tuning of the Hyundai Imax is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +6 hp with no hardware changes.
Can you do Stage 1 on the Hyundai Imax 2.4 MPI 179 hp?
Yes, Stage 1 for the Hyundai Imax 2.4 MPI 179 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Hyundai Imax?
Stage 2 for the Hyundai Imax 2.4 MPI 179 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Hyundai Imax 2.4 MPI 179 hp?
The Hyundai Imax 2.4 MPI 179 hp was fitted with different ECUs depending on the year and trim: Siemens/Continental SIM2K-141, Siemens/Continental SIM2K-142, Siemens/Continental SIM2K-240, Siemens/Continental SIM2K-241, Siemens/Continental SIM2K-341. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Hyundai Imax warranty after chip tuning?
The factory warranty of the Hyundai Imax does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Hyundai Imax take?
On the Hyundai Imax 2.4 MPI 179 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Hyundai Imax?
Yes, the original ECU firmware of the Hyundai Imax 2.4 MPI 179 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Hyundai Imax?
Stage 1 for the Hyundai Imax 2.4 MPI 179 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.